Pencil holder with HoneyComb

70x70x95mm.stl

Knot My Problem

Tired of your kids/classmates/coworkers coming to you with stupid excuses? This cheesy desktop pun can help you get through it. 

See here for video: https://youtu.be/JsiyiJYPUkM 

For first time excuses, run your fingers along the “Knot My Problem” text and quietly repeat the words “Knot My Problem, Knot My Problem…” If the problem does not go away, increase volume.

If the excuses persist, hand “Knot My Problem” to the offender, get up, and leave the room.

If you’ve tried everything and the excuses just won’t let up, you may throw “Knot My Problem” at the whiner in a fit of frustration. 

DISCLAIMER: Don’t blame me if you injure them or break something. Knot My Problem.


Celtic Knot Gridfinity Bin 2x2 Standard

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended: https://social.thangs.com/m/733956 
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Wolf Head Wall Mounted / Headset Holder

WOLF WALL MOUNTED WITH HOLES EYES (1).stl

Tippi Tree Stacking Game

Take turns stacking Leaves on top of your **Tippi Tree**, but don't let it topple! The aim of the game is simple, but you'll find that every round can offer new challenges and surprises. This stacking game features a unique S-shaped Leaf piece that connects to other Leaves in over 60 different ways, so every Tippi Tree grows differently. That makes this game fun and challenging for anyone from age 6 to 106. Great for parties, family nights, desk distractions, and a fantastic gift! 

---
 

**Tippi Tree** is an original game designed for 3D printing. Easy to PRINT & PLAY!

---

This download includes all the parts necessary to build your Tippi Trees:

- Tippi Tree

- Branch

- Tall Trunk

- Short Trunk

- Leaf

Plus bonus parts:

- Test piece

- Tiny Tippi Tree

- Alternate Styles (Blocky and Dual)

- Printable Logo!

- **& MANY MORE** (see updates below)

 

You'll also get PDF instructions for printing and playing:

- Game Manual (printable PDF color and B&W) 

- Printing Guide (printable PDF color and B&W)

I hope you find these instructions thorough and enjoyable! 

 
---

**_General Printing Instructions_**

- All parts print at 11% infill, 2-3 shells, 5 top and bottom layers with a standard 0.4mm nozzle. No supports required.

- PLA suggested but not required. Photos show leaves printed with [MatterHackers PRO PLA](https://bit.ly/PRO-PLA)

- For more details + troubleshooting, please refer to the included Printing Guide


---

**_Update History_**

**Dec 14 2020 Update:**

- Added Tiny Leaf V2 that fits way better than the original
- Added Game Manual translations for German, Spanish, and Italian (thanks Marcel F., Valentín G, and Giovanni L. for volunteer translations)

**February 10 2021 Update:**

- Added Tiki Tree Skin (based on winning competition entry by Jen Day and Bill Drastel)
- Added Leaky Hydrant Skin (based on winning competition entry by René von Koolwijk)
- Added Birds & Berries
- Added Experimental Leaves, Trunks, Branches
- Added Split Tippi Tree Base
- Added Tipmas Tree Puzzle
- Added Belt Printer Version for Leaf (no chamfer on leading edge)
- Added Game Manual translations for Swedish and French (thanks to Thomas H, and Jules S for volunteer translations)
- Removed square version of the manual and printing guide to simplify things

**October 26 2021 Update:**

- Improved fit of Tiny Branch models

**November 30 2021 Update:**

- Added 'Split Tree' version of the Tiki Tree [~/02.Printing Files/02.Extras/05.Tree Skins/01.Tiki Tree (Concept by Jen Day and Bill Drastal)/Tiki Tree_Split Tree Version.stl]

**May 07 2022 Update:**

- Added 'Tiny Berry' files [~/02.Printing Files/02. Extras/02.Tiny/Tiny Berry/...]
More birds! Added Baby Bird, Bluebird, Cockatoo, Finch, and Sparrow [~/02.Printing Files/02.Extras/06.Bonus Bits/01.Birds/...]
**July 25 2022 Update:**

- Added split version of Tiny Tree [~/02.Printing Files/02.Extras/02.Tiny/Tiny_Tree_Split_A.stl + _B.stl]

Tippi Tree // Original Tabletop Stacking Game

Celtic Knot Gridfinity Bin 1x2 Standard

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard:
Celtic Knot Gridfinity Bin 1x2 Extended:
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


 "Screw U" SPLIT VERSION -Desk Décor 

screw-u-screw.stl

Modular Desk Organiser Type 5

Modular Desk Organiser Type 5 Tray.STEP

Mini Coffee Table

coffeetable-base-modelmakers.stl

EZPZ Cable Clip

Keep cables from slipping off your desktop with this simple clip. Just stick some [double sided VHB tape](https://amzn.to/47Ipbyn) on the bottom to affix it to your work surface. For cables up to 4mm in diameter.

Photographed model printed with [Qidi CF-Nylon filament](https://amzn.to/403NySk), but most filaments should work fine.

Desktop Trash Can

TRASH CAN.stl

PLEIADES Pen Stand [Pilot G-2]

Pilot G-2 Pen Holder 0.4 vase PLEIADES.stl

Desktop Mini Golf | Course Set Pack 1

Hole4.stl

SANTA Shhhhh

SANTA Shhhhh.stl

trash can

Wheeled_Brute.stl

2.5" Hard Drive SATA SSD HDD Grids

2.5Drive2x5.step

Celtic Knot Gridfinity Bin 1x1 Standard

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard:
Celtic Knot Gridfinity Bin 1x1 Extended:
Celtic Knot Gridfinity Bin 1x2 Standard:
Celtic Knot Gridfinity Bin 1x2 Extended:
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Desktop Mini Golf | Course Set Pack 2

Hole7.stl

GEN2 Gridfinity Magnet Drawers - MINI

GEN2 2x1 Gridfinity Magnet Double Drawer - MINI.stl

Celtic Knot Gridfinity Bin 1x2 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended:
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


desktop

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pencil holder with HoneyComb

Knot My Problem

Celtic Knot Gridfinity Bin 2x2 Standard

Wolf Head Wall Mounted / Headset Holder

Tippi Tree Stacking Game

Celtic Knot Gridfinity Bin 1x2 Standard

"Screw U" SPLIT VERSION -Desk Décor

Modular Desk Organiser Type 5

Mini Coffee Table

EZPZ Cable Clip

Desktop Trash Can

PLEIADES Pen Stand [Pilot G-2]

Desktop Mini Golf | Course Set Pack 1

SANTA Shhhhh

trash can

2.5" Hard Drive SATA SSD HDD Grids

Celtic Knot Gridfinity Bin 1x1 Standard

Desktop Mini Golf | Course Set Pack 2

GEN2 Gridfinity Magnet Drawers - MINI

Celtic Knot Gridfinity Bin 1x2 Extended