Revolver cylinder fidget spinner toy with bullets that magnetically and satisfyingly pop in and out. Spinner, loader, toggler and clicker in one stylish package!

&nbsp;

---
**Printing tips:**
The parts are already oriented optimally. No supports needed for any parts!

If you're using Orca Slicer or Bambu Studio, a handy project file is included that has my print settings and painted parts ready to go!

&nbsp;

---
**Assembly:**
You need 6x2mm magnets for the cylinder, and either 6x 6x3mm or 12x 6x2mm round magnets for the bullets. The bullet tip has enough room for one 6x3mm or two 6x2mm magnets.

See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Revolver Cylinder Fidget Spinner Toy

Cylinder.stl

Keep your drinks cool and your hands cozy with these stylish Cool Can CooZies! This latest set includes 6 different designs based on my new vase/planter collections. Great for identifying drinks at a party, and eliminates the need for coasters! Scale to whatever size to make fun containers as well.

The STL models are solid, designed to be printed in vase mode extruded with a 1mm extrusion width (works with a 0.4 mm nozzle or higher) and no top layers.

The fit is extremely precise so the can floats down. It's super satisfying! 

That said, some cans with paper labels become a tight fit, so you may want to scale up the model a fraction of a percentage (100.25% or so) or extrude at 0.8mm instead for more compatability. The fit will also depend a lot on your 3D printers accuracy and the actual extrusion width.

The _MERIDIAN_ coozie looks extra nice with a filament swap around 59mm, but many slicers do not allow programmed pausing for vase mode prints. You can try to time it manually, or print in standard mode with 1 shell, 0% infill, and 0 top layers instead (same goes for all the models).

**_Print settings:_**

- vase mode/spiralize
- 1mm extrusion width
- 0.12-0.25mm layer height
- 0 top layers, 4-8 bottom layers

If you're unsure of your printing capabilities or just want to try before you buy, you can get the [free 'KROMATIK' STL here](https://than.gs/m/1045990?affiliateCode=MAKE) before downloading this pack.

Cool Can CooZies 2

CooZie_VESUVIUS.stl

This latest addition to the **VESUVIUS Collection**, is a small cylindrical pot/container featuring the same dense herringbone ribs that increase part strength while creating a dramatic form.

VESUVIUS 003 is 50 mm tall and 94 mm in diameter. This was designed for use with my [140 mm Floating Drip Tray](https://than.gs/m/1036823?affiliateCode=MAKE) to catch excess water runoff.

**_Printing Guidelines_**

The **VESUVIUS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing VESUVIUS 003 with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with roughly 1.2mm thick walls. This will be extra strong, but uses much more material, and I've found the vase mode version to be preferable.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

cylinder

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Revolver Cylinder Fidget Spinner Toy

Cool Can CooZies 2