Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Loose Tolerance Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Medium Tolerance Snappy Cat:**
Coming Soon
**Loose Tolerance Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

chubby bee brother 2

Nerdy Corn

NerdyCorn-Whole.stl

Nerdy Corn with Bow

NerdyCorn_Bow-Whole.stl

Cute Murder Corn


License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
_Only small supports needed under the tip of the arms and the overhang on the knife!_

Candy Corn -Scared (+Bambu 3mf)

CandyCorn_Scared.stl

Candy Corn -Teethy (+Bambu 3mf)

CandyCorn-Teethy.stl

Cute bird 

Cute bird, which can stand. I painted the details. If you have any questions, just ask. 

 Support: Yes

Halloween Pumpkin Gnome (+Tealight Version)

PumpkinGnome.stl

Binx -The Baby Dragon (BAMBU 3MF)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
**Check out my whole Baby Dragon series!**
_-At the size of the file at download, you can place it over an LED tealight candle!_

Cross Bones Magnet.3mf

A cool crossbones magnet based on my crossbones keychain. It requires 2: 8mm diameter magnets that are 2mm tall.

Print Settings:
No Supports
.08 - .16mm layer height
(This download includes a .3mf File for Bambu Labs Users)

-If you want more models like this one, check out my profile! We have 5-15 added weekly and offer a range of memberships, including commercial licenses!!

Cute Ghost - Trick or Treat

Ghost with Hat.stl

chubby bee brother 1

Disney Character Starbucks Style Coffee Coasters (AMS Ready)

Stitch.3mf

Drive Safe Keychain

Drive Safe Keyring.stl

Mimikyu first design.stl

This is the start of another design i will up load but if you just want mimikyu by its self here it is!

Mimikyu is soooooo cute I absolutely adore it and wish i had access to 3d printers as this would be printed at 10x scale and mounted to my wall for halloween

cute

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

chubby bee brother 2

Nerdy Corn

Nerdy Corn with Bow

Cute Murder Corn

Candy Corn -Scared (+Bambu 3mf)

Candy Corn -Teethy (+Bambu 3mf)

Cute bird

Halloween Pumpkin Gnome (+Tealight Version)

Binx -The Baby Dragon (BAMBU 3MF)

View 16 new models

Cute Ghost - Trick or Treat

chubby bee brother 1

Disney Character Starbucks Style Coffee Coasters (AMS Ready)

View 87 new models

Mimikyu first design.stl

baby penguin