Encapsulated Ball Fidget

CGD_Ball_In_Cube Final.3mf

Yet another infinity cube

infinity_cube_50mm.3mf

Auxetic Cubes // 30mm 5x5

Auxetic Cubes 30mm 5x5.stl

Cube and helix, impossible passthrough illusion

Helix.stl

CREATEK S-211 | 3D Printable Storage Box (STL)

CREATEK 3D Printable Storage Boxes
- Stackable
- Optimized for FFF
- Part Numbers
- Reinforced Corners
- No Supports or Raft
- 50mm Grid Sizing

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK_S150_v1.stl

Shift Cube Fidget Toy

All Multicolour.3mf

Surface Slab (SplitP)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S: https://than.gs/m/868235 
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


CREATEK S-321 | 3D Printable Storage Box (STL)

150x100mm Stackable Storage

CREATEK 3D Printable Storage Boxes
- Stackable
- Optimized for FFF
- Part Numbers
- Reinforced Corners
- No Supports or Raft
- 50mm Grid Sizing

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK S-321

Helix Test Cubev2.stl

Easy to print and it's the best way to check your printer

Auxetic Cubes // 18mm 6x6 Stacked

Auxetic Cubes 18mm 6x6 stack.stl

Hinged Gift Box (print in place)  *print upside down for best print*

Print in Place, gift box w/ wrapping & hinges.

ENjoy!

=]

_**you may have an easier time printing this upside down, with the bow tie in upright position as opposed to how it is currently being displayed.**_

Giftbox.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

Triple Twist Cube (Gills)

This cube is part of a series of four fun fidget puzzles that twist apart counterintuitively into three pieces. Can you get them back together?

See here for video: https://youtu.be/ynZUxx0NpIM

The pieces are designed by applying a helical trisection along the C3 axis of a cube. 

Start small with the simple 30mm cube and move up to one of the fancy sculpted 50mm puzzles! Add interest by printing the pieces in different colours.

The pieces for the “Solid,” “Gyroid,” and “Gills” cubes are identical so you will need to print three to make one cube. The infill for the “Stochastic” cube is randomly derived, so you have the option of printing three different and distinct pieces.

Solid 30mm Cube: https://social.thangs.com/m/711923 
Gyroid 50mm Cube: https://social.thangs.com/m/711925 
Gills 50mm Cube: 
Stochastic 50mm Cube:


CREATEK S-331 | 3D Printable Storage Box (STL)

150x150mm Stackable Storage

CREATEK 3D Printable Storage Boxes
- Stackable
- Optimized for FFF
- Part Numbers
- Reinforced Corners
- No Supports or Raft
- 50mm Grid Sizing

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK S-331

Surface Slab (Fischer-Koch S)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S:
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


VORONOI PATTERN CONTAINER

080724-01-000-VORONOI PATTERN CONTAINER.3mf

Infinity Cube my edit v4-1 

infinity cube my edit v4-1 smile.stl

Auxetic Cubes // 18mm 7x7 Stacked

Auxetic Cubes 18mm 7x7 stack.stl

Illusion Cube Ornament Edition || Christmas

Illusion Cube Ornament Edition V1.1.3mf

Würfel-Puzzle

Cube Easy (1).stl

cube

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Encapsulated Ball Fidget

Yet another infinity cube

Auxetic Cubes // 30mm 5x5

Cube and helix, impossible passthrough illusion

CREATEK S-211 | 3D Printable Storage Box (STL)

Shift Cube Fidget Toy

Surface Slab (SplitP)

CREATEK S-321 | 3D Printable Storage Box (STL)

Helix Test Cubev2.stl

Auxetic Cubes // 18mm 6x6 Stacked

Hinged Gift Box (print in place) print upside down for best print

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

Triple Twist Cube (Gills)

CREATEK S-331 | 3D Printable Storage Box (STL)

Surface Slab (Fischer-Koch S)

VORONOI PATTERN CONTAINER

Infinity Cube my edit v4-1

Auxetic Cubes // 18mm 7x7 Stacked

Illusion Cube Ornament Edition || Christmas

Würfel-Puzzle