Frostlands Set (Pre-Supported)

IceBridge_03_Complete.stl

cyrstal cluster wall art crystals wall decor 2d art

cyrstal cluster.stl

Crystal Nintendo switch dock

Crystal Nintendo Switch Dock left.stl

Crystal Straw Topper - Crystal Cropping for your drink

Crystal Straw Topper.3mf

Crystal Dock Nintendo Switch Lite - Holoprops

**Print-in-place
No Support Needed
For Switch Lite. **Check my designs for other consoles

Do you want a fantastic way to customize your Switch Lite?
Here's the Nintendo Switch Lite Crystal Dock!
Super easy to print in any color to go along with your TV setup!

The model was carefully designed to insert the Switch Lite like a glove. There is a convenient cable notch at the back to hold the official USB cable that comes with the Switch Lite.
The USB port is easily reachable thanks to a large opening if you wish to charge the console while on the dock.

**3D PRINTING SETTINGS**
To get the best out of the STL file, please follow these guidelines:
• No support is needed to print this dock. Everything is Print-in-Place.
• Layer Height 0.2mm
• Nozzle 0.4mm
• Recommended infill 15%.
• Recommended Infill Pattern: Gyroid or Cubic

• Prepare and clean your bed for excellent adhesion.
• Make sure your bed is correctly leveled. Then check again :D
• Try to hide the seam and place it where nobody will pay attention.
• Make sure your printing and bed temperatures are adequate for the filament you are about to use.

Geode Sphericon

singlea.stl

Mine Entrance

Gracewindale-mine-entrance.stl

Gem-covered Coyote Skull bracelet keeper 

A kit-bashed model I made to keep my Pura Vida Bracelets. I was going to go with a cow skull and cactus, but decided on this instead. 

The mesh put up a fight, but I got the design working in the end. Print with no supports, works great in PLA or PETG. 
Made from these models, base was sculpted by me in the god-forsaken app that is Blender.
[https://www.thingiverse.com/thing:5403853](url)
[https://www.printables.com/model/245802-gem-generator](url)


Geode Letters

A.stl

Magical Crystals

This is a bunch of magical crystals on a stand, designed for glow-in-the-dark filament.

Weaire-Phelan Salver

This “Weaire-Phelan Salver” is part of a set of three tableware pieces inspired by the Weaire-Phelan structure, the most mathematically efficient way for equal-volume bubbles to fit together to make foam. See here for video: https://youtu.be/f4YIuS_-hSE

The Weaire-Phelan structure is made up of two pentagonal dodecahedra (12-sided) and six tetrakaidecahedra (14-sided) that form a translation unit with a lattice periodicity which is simple cubic. In crystallography, this structure is also known as the A15 Frank-Kasper phase.

There is a good introduction to the “Weaire–Phelan structure” here: http://www.steelpillow.com/polyhedra/wp/wp.html 


Weaire-Phelan Tumbler

This “Weaire-Phelan Tumbler” is part of a set of three tableware pieces inspired by the Weaire-Phelan structure, the most mathematically efficient way for equal-volume bubbles to fit together to make foam. See here for video: https://youtu.be/f4YIuS_-hSE

This piece could be used as a vase or pencil holder.

The Weaire-Phelan structure is made up of two pentagonal dodecahedra (12-sided) and six tetrakaidecahedra (14-sided) that form a translation unit with a lattice periodicity which is simple cubic. In crystallography, this structure is also known as the A15 Frank-Kasper phase.

There is a good introduction to the “Weaire–Phelan structure” here: http://www.steelpillow.com/polyhedra/wp/wp.html 


Weaire Phelan Tumbler

Weaire-Phelan Highball

This “Weaire-Phelan Highball” is part of a set of three tableware pieces inspired by the Weaire-Phelan structure, the most mathematically efficient way for equal-volume bubbles to fit together to make foam. See here for video: https://youtu.be/f4YIuS_-hSE

This piece could be used as a vase or pencil holder.

The Weaire-Phelan structure is made up of two pentagonal dodecahedra (12-sided) and six tetrakaidecahedra (14-sided) that form a translation unit with a lattice periodicity which is simple cubic. In crystallography, this structure is also known as the A15 Frank-Kasper phase.

There is a good introduction to the “Weaire–Phelan structure” here: http://www.steelpillow.com/polyhedra/wp/wp.html 


crystals

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Frostlands Set (Pre-Supported)

View 41 new models

Crystal Nintendo switch dock

View 27 new models

View 46 new models

View 111 new models

View 143 new models

Gem-covered Coyote Skull bracelet keeper

View 10 new models

Magical Crystals

Weaire-Phelan Salver

Weaire-Phelan Tumbler

Weaire-Phelan Highball