Little Ogre

Little Ogre.3mf

Mini Fox

Mini Fox.3mf

3D Printer Doorbell Mount Mod

Mount Extended.stl

Creality E-Fit 5015 Cooling Fan Adapter

I created this adapter to mount a 5015 to the E-fit direct drive extruder kit from Creality.

Prints with no supports and very little filament. Use the existing bolts in the kit to mount the adapter then use M3 bolts to mount the fan to the adapter.

This is tested and works but I am no fluid dynamics expert.

Show me yours if you print one!

@kwerkshop on Instagram

Baby Koala

Baby Koala.3mf

Baby Rex

Baby Rex.3mf

Santa

Santa.3mf

CREALITY K1 MAX RAISER / RISER / DECKEL / TOP COVER / UPGRADE (VERSION 2, WITH SWING-ARM)

PART_BACK-RIGHT_RAISER_SWING-ARM_K1-MAX_VERSION-2 (1x).stl

BIGTREETECH Pi TFT 43 Mount for Ender 3 S1

screen-case.stl

Creality E-Fit Cable Housing

I designed this to fit the Creality E-Fit direct drive extruder upgrade.

This fits over the top, keeping the hot end wires and fan wires stationary while the X axis moves. A zip tie slot at the top secures the cables in position.

I printed in resin because of the awkward dimensions but you may be able to make an FDM version.

K1/K1C/K1SE CFS Upgrade Orca Slicer Config-Test v8

K1 CFS Orca v8.3mf

Glower Mean Ghost 2.0

Glower.3mf

Mini Axolotl

Mini Axolotl.3mf

Polar Seal

Polar Seal.3mf

Creality Air Assist Over/Under Mount w Vibration Compensation

Air Assist Mounting Plate.stl

Creality Spool Holder Plug

SpoolHolderPlug.stl

Filament Roll Extruder Knob - Ender 3

Filament_Roll_Mid_Section.stl

HMG7 Ender 3 V2 Gantry Adapter V3.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

AIRFLOW HEAD EXTRUDER MOD (CREALITY K1 SERIES) / K1 / K1 MAX / K1 SE / K1C

AIRFLOW HEAD EXTRUDER OPTIMIZED.stl

Dippy Baby Diplodocus

Dippy Head.3mf

creality

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Little Ogre

Mini Fox

3D Printer Doorbell Mount Mod

Creality E-Fit 5015 Cooling Fan Adapter

Baby Koala

Baby Rex

Santa

CREALITY K1 MAX RAISER / RISER / DECKEL / TOP COVER / UPGRADE (VERSION 2, WITH SWING-ARM)

BIGTREETECH Pi TFT 43 Mount for Ender 3 S1

Creality E-Fit Cable Housing

K1/K1C/K1SE CFS Upgrade Orca Slicer Config-Test v8

Glower Mean Ghost 2.0

Mini Axolotl

Polar Seal

Creality Air Assist Over/Under Mount w Vibration Compensation

Creality Spool Holder Plug

Filament Roll Extruder Knob - Ender 3

HMG7 Ender 3 V2 Gantry Adapter V3.stl

AIRFLOW HEAD EXTRUDER MOD (CREALITY K1 SERIES) / K1 / K1 MAX / K1 SE / K1C

Dippy Baby Diplodocus