Plant Self Watering Spikes Devices with Adjustable Release Control Valve for Home and Vacation Plant Watering
A simple way to keep your plants from dying when traveling. Easy to use, fill a standard soda bottle with water thread the water spike on, and insert it in a flower pot. You may need to experiment with hole size to get the best results, All plants need different moisture and water will be absorbed differently depending on the soil type used.


Nozzle diameter: 0.4 mm

Layer height: 0.2 mm (to balance detail and print time)

Infill density: 100% for durability and water-tightness

Print speed: 40 mms (slowed to 20 mm/s for fine details at the tip)

Bed temperature: 60 C

Nozzle temperature: 215 C

Important Note:

After printing, it is essential to clean the thread teeth for smooth movement and ease of assembly and disassembly:

Clean the thread teeth of the valve screw using an M10 nut.

Clean the internal thread of the valve using an M10 bolt to prevent the valve screw from breaking during installation.

This self-watering spike is highly functional and easy to print. I welcome your feedback or any questions about the printing process

control

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Plant Self Watering Spikes