gameboy advance sp stand

A small display stand for the Gameboy advance sp

Nintendo wall dock

Minimalistic Wall mounted dock for Nintendo switch (may not fit lite or OLED models)

Theres a cutout in the bottom to attach a usb-c cable, whether be it a usb-c hdmi-hub or just for charging.


By Kasper Tulstrup - Okk-Design.eu 
Released under CC BY-NC-ND 4.0 license
https://creativecommons.org/licenses/by-nc-nd/4.0/legalcode

Mario 8bit 3D Design

Mario new.x_t

Shadow The Hedgehog - Sonic Adventure 2 - Fan Art

monkey With Vr Headset.stl

Monkey From Gorilla Tag With Oculus Quest 2

Sonic The Hedgehog

Oculus Quest 2 Controller Hanger

This is a model for a small wall-mounted hanger for a single quest 2 controller. It is symmetrical, and can also be printed without support if you rotate it a bit, I'm sure you can get it going. I printed this with PETG @235/80 5mm brim, 0.8mm nozzle, 60mm/sec on my ender 3 pro with a volcano hotend.

Karambit 6

Karambit 6.STEP

CanCup - MegaMan blaster

Can Cup in MegaMan's Blaster format!!
This model was designed for the Thangs Workspace Design Challenge!!!
#ThangsWorkspace

It is a remix of the base model of [MandicReally](https://social.thangs.com/u/137761), the [Blank Can Cup - Workspace Challenge Base!!](https://social.thangs.com/m/67884)

I hope you like this design!! :D
Don't forget to follow me on instagram!!!
https://www.instagram.com/LKFLand

Fanatec SQ1.5 4040 Aluminium Mount Bracket.stl

**Fanatec SQ1.5**
_4040 Aluminium Mount Bracket_

Existing solutions available on the market either put the shifter too far away, too close, or encroached into the seated area of the rig. These brackets put the shifter directly over the 4040 extrusion. 

You'll need to print two - one for the front and one back. Should slide nicely onto a bit of extrusion with a width of 40mm. Print with the two prongs facing upward - no supports should be necessary.

**Other hardware required:**
* 4 M6 x 20mm bolts with head diameter of less than 12mm to hold the brackets to the shifter. The 20mm is important here to ensure that the screws don't go more than 15mm into the shifter, as per the Fanatec drilling guide for the unit.
* 4 M8 x 20mm socket cap bolts to attach brackets to profile.
* 4 M8 Slide nuts.


**This is for a 0.4mm nozzle, adjust as appropriate to your printer:**

* Increase the number of walls to 8, this creates a solid block where the bolts connect to the shifter
* If possible in your slicer, set the infill or number of walls in such a way that it creates a solid (100% infill) for the holes that the bolts go through for the profile.

These settings ensure you can tighten up the bolts plenty, without risk of crushing the plastic easily.

kirby

a fun 3d model of Kirby

printing instruction
easy to print
layer height: 0.2 (0.15 RECOMEDED)
wall line count: 2
infill: 7%
support: yes

kirby.stl

Karambit 2

Karambit 2.STEP

Town Hall-clash of clans

Legend of Zelda Triforce Ear Tunnel

This is scaled to a 9/16 gauge. Cura would not print this with a 4mm nozzle.
Print settings:
2mm nozzle
3 walls (.2mm thickness)
20% infill

brekok fallout 76

Fallout_76 góra O.stl

Stand_play.stl

Stand para 12 discos con temática de Playstation.

Xbox colntroller MOD

world of nintendo mario bros arcade.stl

this for people who want to make mario bros arcade sprite in 3d

world of nintendo mario bros arcade back.stl

more jakk pacific mario figures if you want to make one like this use gox

Luma Star from Super Mario

Lumas are star-like creatures that first appear in Super Mario Galaxy. Unlike most Stars, they have a rain drop-like shape and come in many colors, with the most common one being yellow.

This is a fanart 3d model and hopefully a fun and easy print

**printing settings**
easy to print
resin or fdm
layer height: 0.2 
wall line count: 2
infill: 7%
support: yes, support are needed just underneath the model so use support blocks in cura and cover the hands as it's shown in the picture bellow, also use tree support.




this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

happy printing


computer & video games

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

gameboy advance sp stand

Nintendo wall dock

View 11 new models

Shadow The Hedgehog - Sonic Adventure 2 - Fan Art

monkey With Vr Headset.stl

Sonic The Hedgehog

Oculus Quest 2 Controller Hanger

Karambit 6

CanCup - MegaMan blaster

Fanatec SQ1.5 4040 Aluminium Mount Bracket.stl

View 10 new models

View 10 new models

Town Hall-clash of clans

Legend of Zelda Triforce Ear Tunnel

brekok fallout 76

Stand_play.stl

Xbox colntroller MOD

world of nintendo mario bros arcade.stl

world of nintendo mario bros arcade back.stl

Luma Star from Super Mario