Multitool Pouch #OutdoorThangs

I wanted a belt clip that I could quickly get my leatherman wingman out and in without fiddling around. This is my second version but I'm very happy with it so far. 

Leatherman Pouch V2 v1.stl

Car sun visor tissue box holder

HMG7.3 HyperCube-BLV Style Box X Carriage Tall Back.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Kitchen Door Clip

I have a pretty small kitchen and after a renovation, we lost the spot where we used to hang our dish towels. After some family brainstorming, we came to the conclusion that we need a whole new house... lol. But in the meantime (which could take a few years), the best solution was to design these clips to attach the towels to the door handles. It works pretty well and it went from a temporary solution to a permanent one.

Just a heads up: these clips were designed to fit the doors and handles I have at home. To make it work in your house, you may need to make some adjustments in X, Y, and Z so the clip fits properly in your kitchen.

Oh, and I'd like to point out:
 - it's a quick print that doesn't use much filament.
 - I've been using them in my kitchen for about a year now and haven't had to replace them yet.

Print Settings:
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 2 or 3
Supports: No
Change filament during print: If you wish
Pause during print: No
Brim: No
Raft: No

I hope you have fun with this model! If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Magnetic Bag Clip V4

BagClip_v4.step

Mini Bottle Hanger

Magnetic Bag Clip / Clamp

BagClip_v3 v1.step

Ear plug clip

Without text clip

Removable Paperclip Zipper Pull Tab

Removable Zipper.stl

Tsurikawa Friction Clip.stl

Friction fit clip for 3/4 inch straps and webbing. I used it to hang a tsurikawa. 

3/4 Inch Friction Clip.stl

Sovol sv06 toolholder

holder.stl

Headlight Clip

Headlight Clip for 4th Gen Ram 1500.  Could not find one anywhere but mopar so I designed one 

Aquarium pipe clip for water change 🐟

Pipe clip designed to hold 10mm pipe in for water changes.

Let me know of any changes to work for other aquariums :)

DC_CLIP_v1.stl

Replacement for plastic retainer clip for TSC7 style data collectors.   Approximate measurements and could use refinement.  This part has lasted for a couple of months in PLA at 30% infill.  This is a great sacrificial piece in the case of a drop or fall.  It's better to lose some plastic than the data collector.

3DJake Vacuum Clip Holder

3djake vacuum clip holder.3mf

Replacement Helmet Visor Clip | Motorcycle

A quick, cute replacement for a broken visor clip.

Large Bag Clip

large_bag_clip.step

Medium Bag Clip

medium_bag_clip-v2.step

 Clip Chip to hold your chip clips 

The Clip Chip (for your chip clips), is a good tip to keep your clips (and your chips) from giving you the slip. The dips on the chip should ensure a non-slip grip on your chip clips. Don't flip if the dips along your chip don't form an even strip. This should be something you can whip up with a real zip, but I won't nip at any of your tips. The tip of the chip does dip enough to make it stable enough to ship, but don't flip if that goes to slip. Don't take my quips as some sort of superior drip; I will trip as much as I skip. Let me know what issues you have with you clip chip, and how it can better grip your chip clips.

blip, crip, gyp, kip, lip, rip, sip, thrip, yip.

clip

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Multitool Pouch #OutdoorThangs

View 10 new models

View 510 new models

Kitchen Door Clip

Magnetic Bag Clip V4

Mini Bottle Hanger

Magnetic Bag Clip / Clamp

Ear plug clip

Removable Paperclip Zipper Pull Tab

Tsurikawa Friction Clip.stl

Sovol sv06 toolholder

Headlight Clip

Aquarium pipe clip for water change 🐟

DC_CLIP_v1.stl

3DJake Vacuum Clip Holder

Replacement Helmet Visor Clip | Motorcycle

Large Bag Clip

Medium Bag Clip

Clip Chip to hold your chip clips

Drinking Straw Clip 2023