This ClampDock Accessory has two fold-down hooks to suitable for hanging a wide range of things, including light garments, keys, glasses, dog leash and collar, etcetera.  It snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  

The two hooks print separately and snap into the main body.  

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Folding Hooks

ClampDock Folding Hooks 1v00a large hook.stl

This general-use pocket is approximately 100mm wide, 40mm deep and 100mm high. 
 It is suitable for pens, glasses, or anything else that fits in it and you want to keep handy. 

This pocket is similar too but larger than the original pocket posted here…
https://than.gs/m/1256849

This pocket snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.



ClampDock Accessory - Pocket 100Wx40Dx100H

ClampDock Group A 1v00b rect pocket 100x40x100.stl

This Folding Soda Holder snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it to hold standard-size soda, beer or beverage cans and fold it up when not needed.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.

ClampDock Accessory - Folding Soda (Drink) Holder

ClampDock Folding Soda 1v00a main.stl

This a general purpose charging tray large enough for phones and tablets together.  It snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it for charging or as a stand for your devices.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.




ClampDock Accessory - Charging Tray

ClampDock charging tray 1v00a.stl

This multi-purpose accessory snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it to hold or hang keys, glasses, hats, a wallet, a phone or anything else that fits it.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Keys, Glasses, Hat, Wallet, Phone Holder

ClampDock hat-keys-glasses 1v00a.stl

This soda can holder snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

———————
This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs: 
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


clampdock

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

ClampDock Accessory - Folding Hooks