O'zapft is! (It's tapped!), and so Oktoberfest is about to begin (or has depending on when you see this). This stein can koozie is perfect for keeping the beverage cold during this wonderful season! Prost!

Printed in Panchroma Matte PLA - Charcoal Black
https://us.polymaker.com/products/panchroma-matte

Private Use Only.

Discord for Questions: https://discord.gg/7Fxpk3fkak 

Become a Thangs.com Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

Oktoberfest Stein Can Koozie

Oktoberfest.stl

Due to the success of my Mounted Trash Bin, I've created this standalone version. It's a large trashcan that prints in several parts optimized for 3D printing, with plenty of variations and optional additions for total customization!

---

_**Printing & Assembly**_

Due to the optimized design, you can print most of these parts using default print settings. Nearly all the parts print without supports, but the new Locking Inner Rim requires support generation for a long bridge to allow for the improved lid flap.

Here is a description of the various parts:

- **Lid_Locking** : The lid of the trashcan, which snaps into place when fully opened for one handed operation. Print with 4 shells/perimeters for a hinge longevity.
- **Top_Rim_Inner_Locking** : Snap the Lid into this part. _Enable Supports!_
- **Top_Rim_Inner_Locking_Loose** _(optional)_ : A looser version of the Inner Rim, useful for thicker trashbags or less precise printing. _Enable Supports!_
- **Top_Rim_Outer** : This is the part you wrap the top of your trash bag around, which is then sandwiched into place with the Inner Rim. _There is an oval notch on the front of both the Inner and Outer Rim. Make sure they're oriented the same way!_
- **Lid_OG** _(optional)_ : The original version of the lid, without a flap on the front, and doesn't lock in the open position
- **Top_Rim_Inner_OG** _(optional)_ : Only use with Lid_OG
- **Corner_Post** : The four vertical posts that connect the Top and Bottom Rims. I would suggest 4+ perimeters/shells for strength. Print 4. Align with the channels on the Bottom_Rim and snap all 4 into place. Then set the Top_Rim_Outer onto the four posts and press each corner straight down to snap into place.
- **Bottom_Tray** _(optional)_ : This tray rests inside the Bottom_Rim to support the bottom of the trash bag. Useful if you're throwing away heavy things that might rip the bag if unsupported.
- **Bottom_Tray_Deep** _(optional)_ : Another version of the bottom tray with higher walls. Usefull if you are tossing things that might leak.
- **Foot_TPU** _(optional)_ : Small feet to be printed with TPU or another flexible filament. These are simply glued to the corners of the bottom of the Outer_Rim to add a cushion between bin and floor, for protection and non-slip.
- **Walls_Plain** _(optional)_ : Conceal the trash bag and keep it from bulging out if it's larger than the bin. Print in vase mode with 0.6mm extrusion width and 0 top/bottom solid layers. 
- **Walls_Fluted** _(optional) : Same as Walls_Plain but with a fluted texture that adds a bit of strength and decorative appearance. More likely to warp from filament shrinkage while printing!

---

Yes, it's a lot of parts, but the result is a nice, large, super functional trashcan that you can customize to your needs! Leave a comment if you have any questions or requests and I'll respond ASAP!

- **Nov 2, 2025 Update** : Added an 'ExtraFlex' version of the Corner Posts, which makes it easier to take apart and put together over and over.

---


Photographed model was printing with various PLA filaments on the [Qidi Plus4](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK))

Wireframe Wastebin // Standalone Trashcan

Lid_Locking.stl

Corner_Post(4)_ExtraFlex.stl

This Dumber than he look beer can holder / koozie is definitely going to be the laugh of the party. You know you have some friends that would get a kick out of this!! 

Holds a standard 12 ounce can. 

This model is for private use only. Become a member of our Thangs page for commercial licenses which authorizes you to sell these printed items. 

Make sure to like and follow for more. 

Dumber than he looks can holder

Dumber_than_he_looks.stl

The updated ITALIC V2 is an eccentric watering can featuring a playful skewed profile. The original ITALIC has been refined for improved functionality whilst maintaining the iconic shape.


**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful.

My settings:
- 0.16 mm layer height
-5 perimeters
- 20% Gyroid infill
- 10mm brim (or use the 'wBrim' version)

Download includes a 'wBrim' version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. I managed printing the unsupported version with a 10mm brim, using ASA.


---

Photographed model was printed using [QIDI ASA Green](https://qidi3d.com/products/qidi-asa-filament?variant=41725687496844&sca_ref=6089281.BQS8d0sJuF) ([Amazon](https://amzn.to/3HK5pK6)) on the [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)). 

ITALIC V2 Watering Can

ITALIC_V2_wBrim.stl

Dragon 12oz  can cozy with built in spinner.  No dice required. A fun additon to any game night! Easy assembly with just magnets and  glue. Screws are optional. Requires supports on the top piece only around the base. Color change files for the numbered spinner also included.
You will need 36 Magnet 8x2mm Rare Earth Magnets Neodymium Magnets for Crafts https://www.amazon.com/dp/B0CCXJTTFM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Assembly video included.

12 oz Dragon D20 magnet spinner can cozy

Top.stl

[_**V2 is now available HERE**_](https://than.gs/m/1377006?affiliateCode=MAKE)

ITALIC is an eccentric watering can featuring a playful skewed profile. The enclosed container is filled through an opening in the top of the handle, which can also be covered with your thumb while pouring to regulate flow. Like any good fancy designer product, it's slightly awkward to hold. How will you pick it up? :P

**_Printing Guidelines_**

The walls of this container are 1.2 mm thick, and only the handle portion is solid. I suggest printing with a high wall count (5+) to ensure that the thin handle won't snap off.  You also need to ensure that your printer can create watertight models, otherwise this won't be quite as useful. I used default print settings on my Bambu Lab X1-Carbon with ABS and it worked out!

Download includes a version with minimal supports since the handle is unsupported for much of the print, as well as a version of just the watering can. In either case, I would suggest a substantial brim to help with bed adhesion. 

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Mint ABS](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


ITALIC (V1) Watering Can

ITALIC_can_supported.stl

Keep your drinks cool and your hands cozy with these stylish Cool Can CooZies! This latest set includes 6 different designs based on my new vase/planter collections. Great for identifying drinks at a party, and eliminates the need for coasters! Scale to whatever size to make fun containers as well.

The STL models are solid, designed to be printed in vase mode extruded with a 1mm extrusion width (works with a 0.4 mm nozzle or higher) and no top layers.

The fit is extremely precise so the can floats down. It's super satisfying! 

That said, some cans with paper labels become a tight fit, so you may want to scale up the model a fraction of a percentage (100.25% or so) or extrude at 0.8mm instead for more compatability. The fit will also depend a lot on your 3D printers accuracy and the actual extrusion width.

The _MERIDIAN_ coozie looks extra nice with a filament swap around 59mm, but many slicers do not allow programmed pausing for vase mode prints. You can try to time it manually, or print in standard mode with 1 shell, 0% infill, and 0 top layers instead (same goes for all the models).

**_Print settings:_**

- vase mode/spiralize
- 1mm extrusion width
- 0.12-0.25mm layer height
- 0 top layers, 4-8 bottom layers

If you're unsure of your printing capabilities or just want to try before you buy, you can get the [free 'KROMATIK' STL here](https://than.gs/m/1045990?affiliateCode=MAKE) before downloading this pack.

Cool Can CooZies 2

CooZie_VESUVIUS.stl

I made these mounted trash bag bins specifically for the Red/Green waste bags used in my region of Sweden, but you may find them useful for your own situations as well! I have mine mounted on the cabinet drawer under my kitchen sink for super convenient and accessible composting.

The design consists of four parts:
- A lid
- An inner rim that connects to the lid
- An outer rim that holds the trash bag and snaps onto the wall mount
- A beefy wall mount that securely clips onto the rim.

Default print settings should work out. I used PC filament to make the mount extremely resiliant but I suspect most filaments should be sufficient. The rest of my parts were printed with PLA. Share your results if you try something else!

The mount has holes for up to 6 wood screws, but I only used the top 4 and it's enough, even with short 19mm screws. The holes are sized for threads up to 4mm wide, but you should be able to expand the holes by pre-drilling if necessary.

**_July 18, 2025 Updates_**
- The lid and inner rim used to be a single print in place part, but this has proven to be unecessary. The parts are now split and you can flex the inner rim to snap the lid onto the hinge.
- Added a new **locking** lid! This upgraded lid snaps into the open position to stay up on its own.
- Looser version of the locking lid is also included. Useful for thicker trashbags or less precise printers.
- **note:** You **must** use the Locking Inner Rim together with the Locking Lid.
- **note:** The new Locking Inner rim requires **support material** generation turned on! It's a small amount of supports, but this enables the flap on the lid for easier handling.

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Bambu Green PLA, Red PETG, and Clear PC filaments](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


Mounted Trash Bag Bin (Updated)

Lid.stl

Inner_Rim.stl

Inner_Rim_Locking.stl

Inner_Rim_Locking_Loose.stl

This amazingly unique can holder has the top of a naval drum and tentacles sprouting out the bottom. This will draw attention anywhere you take it. 

Definitely need supports on the bottom of this but it comes out awesome.

Private Use Only
Become a Member for commercial licenses! 

Make sure to like and follow

Naval Drum with Tentacle Beer Can Holder

Tentacle_Koozie.stl

Stay organized in style with this functional and style with this functional and versatile 3D model from Thangs.com, designed by CL3D PRINTING. This ingenious conception brilliantly serves as a Tavern Can for keeping your 12-ounce beverage chilly, and as a Pen Holder to keep your workspace tidy. Adaptable for multi-color printing or post-print painting, this model integrates practical use with a fun, tavern-themed aesthetic. Engineered to be support-free, it effortlessly accommodates a standard 12-ounce can. Explore Thangs.com for more such intricately designed 3D Printing models in the "Functional/Organizers" category.

Relish this model for private uses and join as a MEMBER for advantageous commercial usage. Membership also unlocks priority recommendations and customization options, presenting you with an array of 3D models tailored to your preferences. Connect with us by liking, following, and posting your creations. We would be thrilled to see and appreciate your initiative! Perfect your 3D printing and organizing skills with this palm-sized tavern can/pen holder.

can

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Oktoberfest Stein Can Koozie

Wireframe Wastebin // Standalone Trashcan

Dumber than he looks can holder

12 oz Dragon D20 magnet spinner can cozy

ITALIC (V1) Watering Can

Naval Drum with Tentacle Beer Can Holder

Tavern Can / Pen Holder