A nice general purpose cleaning brush and dust pan set to keep your place tidy! This large variation has a brush that is roughly 180 mm wide with 95 mm bristles. The dust pan is 215 mm wide.

**_Printing Guidelines_**

Printing the brush requires a well tuned printer and proper slicer settings to successfully create the long bristles using bridging. I suggest a 0.4mm nozzle and Classic rather than Arachne wall generator. Slow bridge speed, high cooling, and lower extrusion temperatures can all help get clean bridging. You may want to first print the smaller [Detail Dusting Brush](https://than.gs/m/1044850?affiliateCode=MAKE) to make sure your settings are appropriate before trying this larger print.

The handles should be fine with your default print settings. Six [6 mm x 3 mm neodymium disc magnets](https://ebay.to/3kMB1A4) can be [glued](https://amzn.to/44LMqVm) into the handles so they stick together for storage (make sure to get the magnet polarities right!)

--- 

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab Marble PLA and Purple ABS](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


brooms

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Large Brush & Dust Pan