Bowl Frog

OnlyFrogs_011_prepainted.3mf

Mini Barnacle Bowls (Dual Extruder)

Mini Barnacle Bowl 1 Dual Colour - Barnacles.stl

Spiral Bowl (Support Free)

An easy to print, decorative bowl.

No supports are needed for this model - you shouldn't need a brim or anything else either! 

Snack Bowl Type 1

Snack Bowl Type 1 Base_STL.stl

Comedy & Tragedy Pumpkin Pot +MMU

ComedyPumpkinPot.stl

Cushion trays

Cushion_B.stl

Simple Pumpkin Container - High Res

All Files.3mf

Truchet Trays (Large)

Truchet Tray Large 1.stl

Bouffant Tazza Bowl 

Bouffant Bowl.stl

Captive Gemstone Container (small)

The faceted “gemstones” in these containers are captive, meaning that once printed they rotate freely within the wall. 

See here for video: https://youtu.be/U29BH97z4Jc 

This design is particularly suited to printing with multicolour filament as rotating the gemstones allows for visualization of the different filament colours.

This model features the tricolour “Silk Red & Yellow & Blue” filament by Eryone.

Once printed, allow the print to cool. Wiggle each gem back and forth until it breaks from the small internal supports.  Twist it a few times until it turns smoothly.

See here for other “Captive Gemstone Containers” in the series:


Skull Candy Bowl

Enjoy your Halloween sweets with this realistic human skull candy bowl!

I work hard to deliver an easy printing experience; please let me know if you have any difficulties when printing my models. I will try my best to help you.



bowl "heliopora coral"

**A coral inspired bowl for whatever is just flying around and needs a proper storage location.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 200 x 200 x38 mm
- Smaller (80%): 160 x 160 x 30mm
- Small (60%):  120 x 120 x 23 mm
- I would not scale it down below 40%

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: (100% scale): 17h

Material usage (80% scale):120g
Print time: (80% scale): 11h

Material usage (60% scale): 60g
Print time: (60% scale): 5h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

bowl_heliopra.stl

Dragon Guardian Bowl

Dragon_Bowl.stl

Small Bowl

**A small organic bowl for whatever is just flying around and needs a proper storage location.**

Size: 210 x 210 x 30 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 220 x 220 x 40 mm
Material usage: 140g
Print time: 13h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

The forbidden rose bowl

The forbidden rose bowl.stl

Garter Knit Round Bowl (Circumferential)

This bowl is part of a pair of knitted round bowls featuring a “garter knit” pattern. A garter knit is formed by alternating rows of regular and purl stitches.

In one bowl, the alternating rows are oriented vertically, in the other they are oriented circumferentially.

See here for video: https://youtu.be/y0uVxO7lLik 

See here for other Garter Knit Round Bowls:
Circumferential:
Vertical:


Use supports for the outside bottom of the bowl. The top inside of the bowl has bridges and overhangs that cannot be supported. The print fails will be small and mostly hidden, and you can clean up any visible flaws with a file.


Ghosty Candy Bowl

GhostCandyBowl.stl

STARBOWL

Here is the file for my STARBOWL.

a fun print for your holiday decorations.

it print with zero supports, but you are going to want to use some infill.

I hope you enjoy and Merry Christmas

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

120-Cell Polychora Planter

This Polychora Planter is derived from the four-dimensional 120-cell 4-polytope, or polychoron.

The 120-cell is one of six regular convex four-dimensional shapes. It is composed of 120 dodecahedral cells. 

4-polytopes cannot be seen in three-dimensional space due to their extra dimension, but there are several techniques that can be used to “project” 4-polytopes into three-dimensional space. This design uses the cell-centered stereographic projection method, chosen for the interesting aesthetic appearance.

While these three-dimensional shapes have curved faces and edges of various lengths, it is interesting to imagine that in four-dimensional space, the faces are flat, and the edges are straight and identical in length.

In this design, select cells have then been removed to allow better visualization of the inner cells, and the outer cells have been hollowed for uses as planters of containers of some kind.


Christmas bowl

model302.stl

bowl

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bowl Frog

Mini Barnacle Bowls (Dual Extruder)

Spiral Bowl (Support Free)

Snack Bowl Type 1

Comedy & Tragedy Pumpkin Pot +MMU

Cushion trays

Simple Pumpkin Container - High Res

Truchet Trays (Large)

Bouffant Tazza Bowl

Captive Gemstone Container (small)

Skull Candy Bowl

bowl "heliopora coral"

Dragon Guardian Bowl

Small Bowl

The forbidden rose bowl

Garter Knit Round Bowl (Circumferential)

Ghosty Candy Bowl

STARBOWL

120-Cell Polychora Planter

Christmas bowl