Dinosaur Fossil Coaster

coaster-display-stand.stl

White-tailed Deer Skull

White-Tailed Deer Skull.obj

(75mm) Gothric, The Decayed

STL_Lich_Body_75mm_Supported.stl

Fishbone Bookmark/Paperclip

Fishclip_Thick.stl

EZPZ Keyring Bone 1" // Keychain Ring

Keyring Bone.stl

SKELETON HAND MIDDLE FINGER

Skeleton Hand Middle Finger.stl

SKELETON HAND PEACE SIGN

peace skeleton hand round.stl

SKELETON HAND HORNS ROCK AND ROLL

skeleton_hand horns.stl

Bone Claw - Monsters of the Multiverse - PRESUPPORTED - Illustrated and Stats - 32mm scale			

Bone Claw - Full.stl

SKELETON HAND OK SIGN CIRCLE GAME

skeleton_hand_ok round.stl

Dog Bone Snowflake Ornament

Another new ornament, this time for the dog lovers. Snowflake shape with a bog bone and paw inside. I like it in bronze, would probably look good in white, gold, or silver as well. 

Fidget Femur

Such a weird design. I have no other explanation.

This fidget femur uses a print-in-place ovoid joint to create and unique tactile movement. This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

See here for video: https://youtu.be/br1-jSqgU18

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. 
You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


Lattice Skull Wire Tangle

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave: https://than.gs/m/948893 
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Skull Wire Weave

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Skull Diamond

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Skull Square

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square:
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942802
**Loose Tolerance Extra Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Print-In-Place, No Supports, Articulating Fidget Toy

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each SNAP will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

Tolerance:
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Extra Long Bony Basilisk:
Coming Soon
Loose Tolerance Long Bony Basilisk:
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Print Settings:
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Human Skull

Easy to print human skull model.

Be sure to check out my thangs profile for all o my designs.

I provided two different versions of the model. One with a flat bottom and the other without a flat bottom.

1-3 walls
no supports
any layer height

bone

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Dinosaur Fossil Coaster

White-tailed Deer Skull

View 65 new models

Fishbone Bookmark/Paperclip

EZPZ Keyring Bone 1" // Keychain Ring

SKELETON HAND MIDDLE FINGER

SKELETON HAND PEACE SIGN

SKELETON HAND HORNS ROCK AND ROLL

View 38 new models

View 15 new models

Dog Bone Snowflake Ornament

Fidget Femur

Lattice Skull Wire Tangle

Lattice Skull Wire Weave

Lattice Skull Diamond

Lattice Skull Square

Skull Pop Beads

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Human Skull