Lattice Skull Diamond

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


 The Halloween Cauldron Container  - Print In Parts / No Support Required 

Cauldron.stl

Zombie Finger with Bone and Bloody Back - Print in Place Articulating Flexy

Finger.stl

Melting Skull

Meltingskull.stl

FORBIDDEN ROSE / ROSE WITH SKELETON HEAD ROSE AND STEM / GOTHIC DECOR / HALLOWEEN

ROSE.stl

Jack skellington

Jack skeleton .stl

Sleeping Cubone

Sleeping Cubone Painted.3mf

Skelly Pixie

skelly_pixie_3mf.3mf

Lattice Skull Square

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square:
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Skull Wire Tangle

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave: https://than.gs/m/948893 
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


MELTING SKELETON HEAD WITH TEALIGHT / HALLOWEEN DECOR / DARK DECOR / GOTHIC

SKELETON HEAD WITH TEALIGHT ON TOP (MELTING).stl

PAWTRAIT STAND

PHOTO HOLDERS V3.3mf

Beware In Bones

Beware in bones.stl

Articulated Bone Tail

Bone Tail (LONG).stl

Skull Drake Hand Puppet (Personal Use)

drake_skull_puppet_skull_top.stl

gothic octopus planter

gothic octopus planter.stl

Seahorse Exoskeleton with Base

Seahorse_Exoskeleton.stl

Low Poly Skull (Horizontal split)

Low poly skull, vertical split.stl

Skull card holder

Skull card holder (one piece.stl

Lattice Skull Wire Weave

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


bone

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Lattice Skull Diamond

The Halloween Cauldron Container - Print In Parts / No Support Required

Zombie Finger with Bone and Bloody Back - Print in Place Articulating Flexy

Melting Skull

FORBIDDEN ROSE / ROSE WITH SKELETON HEAD ROSE AND STEM / GOTHIC DECOR / HALLOWEEN

Jack skellington

Sleeping Cubone

Skelly Pixie

Lattice Skull Square

Lattice Skull Wire Tangle

MELTING SKELETON HEAD WITH TEALIGHT / HALLOWEEN DECOR / DARK DECOR / GOTHIC

PAWTRAIT STAND

Beware In Bones

Articulated Bone Tail

Skull Drake Hand Puppet (Personal Use)

gothic octopus planter

Seahorse Exoskeleton with Base

Low Poly Skull (Horizontal split)

Skull card holder

Lattice Skull Wire Weave