Wall Sizes (Calibration & Quick Reference Tool)

Wall+Size+Reference.3mf

Steamy - The Train Benchmark

Steamy.stl

Planetary Gear Benchmark and Demo

Planetary_Gear_Benchmark_by_nimaid.stl

The House Of Benchmark

house_of_benchmark_one_piece.stl

FabbEgg - The threaded surprise egg, that is easy to print, and SOOOOOO satisfying.

Fab Egg - Surpise Egg Full Model.stl

Huette-Test v2.stl

Mr. Rockboto: the Benchmark Bot

Mr. Rockboto is not only a fun print-in-place figure but it is also a very useful calibration tool.

He has 14 functional joints with different orientations, couplings, and tolerances. The tolerances range from 0.2 - 0.5mm and allow you to test the minimum clearances your printer can produce and still achieve print-in-place movement.

Each limb is labeled with the tolerances of their joints and all other joints have a 0.3mm tolerance. It might take a little (just a little) bit of force to break them free any more and you risk breaking the robot.

Link to the original Benchmark Bot:
https://thangs.com/Kazi%20Toad/Benchmark%20Bot-55105

Print Settings:

No support!
No brim!

The point of the Benchmark Bot is to find the best parameters to make it function, therefore it is difficult to recommend any settings.

That being said, I used the following parameters:
0.4mm nozzle, 0.2mm layer height, PLA, 3 walls, 4 top/bottom layers, 10% infill.

Benchmark Bot

Move over boat, there is a new benchmark in town.

This robot is not only a fun print-in-place figure but it is also a very useful calibration tool.

The robot is designed with 17 functional joints with different orientations, couplings, and tolerances. The tolerances range from 0.2 - 0.5mm and allow you to test the minimum clearances your printer can produce and still achieve print-in-place movement.

Each limb is labeled with the tolerances of their joints and all other joints have a 0.3mm tolerance. It might take a little (just a little) bit of force to break them free any more and you risk breaking the robot.

It only uses 20g of filament and is small enough to fit on a Prusa mini or even a Voron V0.

Benchmark Bot (Kazi Toad)

benchmark

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wall Sizes (Calibration & Quick Reference Tool)

Steamy - The Train Benchmark

Planetary Gear Benchmark and Demo

The House Of Benchmark

FabbEgg - The threaded surprise egg, that is easy to print, and SOOOOOO satisfying.

Huette-Test v2.stl

Mr. Rockboto: the Benchmark Bot

Benchmark Bot