_The model is available for free for all my membership subscribers (and available to buy individually). [Check out my membership tiers!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D)_

---

&nbsp;

Ever since I made the [Tickler BB-13](https://than.gs/m/1034516?affiliateCode=Jaatinen3D), I've wanted to design a double barrel shotgun using the same mechanism. Here it finally is and it's ready to kick ass!

See it in action here: https://www.youtube.com/watch?v=xsVJvoRTt0Y

Includes a complimentary **Shotgun Shell Weapon Charm**! The weapon charm chain has an end clip that is compatible with all my Ringchaku designs, so you can attach any Ringchaku end to it! Although most of them are probably too big... But stay tuned for more weapon charms in the future!

**Assembling this requires no glue or bolts or nuts! Apart from the printed parts, you'll only need:**
- One pen spring *(max 5mm diameter, 15-20mm uncompressed length, <9mm length compressed)*
- Two rubber bands (10-30mm diameter)

&nbsp;

---

➡️ [There's a display stand available for this gun!](https://than.gs/m/1056358?affiliateCode=Jaatinen3D) ⬅️

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation.

Use supports for *Trigger Assembly Cover Left* and *Trigger Assembly Cover Right*. All others are up to how your printer can handle small bridges and overhangs.

I recommend printing the *Barrel Lock Latch* in a "slippery" filament (not matte) because otherwise you might not be able to slam the barrel closed due to friction between the barrel and the latch.
&nbsp;

---

**Assembly:**
Watch the included assembly video!

&nbsp;

---

If you don't have BBs, I've included a printable bullet that works at least as well as a BB!

---

&nbsp;
_There's been a rumor of a_ charming _little mystery... You should check it out, maybe there's something in it for you? [I've marked it on your map.](https://jaatinen3d.com/arvoitus/)_

Rutku BB-20 — Fully 3D-printable airsoft shotgun with shells

Rutku BB-20 - Bambu Printers.3mf

Shotgun Shell Charm.stl

Ringchaku Charm Chain.stl

Yeah, I couldn't resist making a keychain blaster inspired by the AF2011, an anniversary edition of M1911, with double barrels... Check out [the normal M1911 pistol keychain blaster](https://than.gs/m/1429293?affiliateCode=Jaatinen3D) as well!

This little keychain sized functional single-double shot airsoft blaster, inspired by the Arsenal Firearms AF2011, shoots 6mm plastic airsoft BBs and has a magazine that can store up to 8 BBs! The finely crafted details of this toy pistol come to life even with a 0.4mm nozzle.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

You need to print 2x _Firing Pin_.

The following parts require supports:
- _Frame_ — Tree/organic supports
- _Grip Rear_ — Normal supports
- _Hammer_ — Normal supports
- _Firing Pin_ — Tree/organic supports
- _Trigger_ — Tree/organic supports

I also recommend using brims for stability for _Slide_ and _Barrel_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and three small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

AF2011 Pistol Keychain — Functional Blaster Toy

Frame.stl

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a stylish storage and gift box that has an insert designed for this blaster!**

---

**Also check out the double barreled version — [AF2011 Pistol Keychain](https://than.gs/m/1441529?affiliateCode=Jaatinen3D)!**

---

&nbsp;

_The M1911 is a semi-automatic, single-action, recoil-operated pistol designed by John Browning and adopted by the U.S. military in 1911, renowned for its .45 ACP stopping power, reliability, and enduring use for over a century._

This little keychain sized functional single shot airsoft blaster, inspired by the Colt M1911, shoots 6mm plastic airsoft BBs and has a magazine that can store up to 4 BBs! The finely crafted details of this toy pistol come to life even with a 0.4mm nozzle.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

The following parts require supports:
- _Frame_ — Tree/organic supports
- _Grip Rear_ — Normal supports
- _Hammer_ — Normal supports
- _Firing Pin_ — Tree/organic supports

I also recommend using brims for stability for _Slide_ and _Barrel_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and two small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

M1911 Pistol Keychain — Functional Blaster Toy

_Is that a banana in you pocket or are you just happy to print Jaatinen3D's new keychain blaster?_

&nbsp;

---

**Printing tips:**
No supports needed! Parts are already oriented optimally. If you're using OrcaSlicer or Bambu Studio, there's a handy .3mf project file included with painted banana!

&nbsp;

---

**Assembly:**
You'll need superglue, a small 5mm diameter spring 15-25mm long and one M3 bolt at least 12mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Banana Blaster Keychain — Functional Blaster Toy

Banana Blaster Body.stl

Extended barrels and magazines for the [Tickler SA-6](https://than.gs/m/1066044?affiliateCode=Jaatinen3D).

**Extended barrels:**
- Normal extended length version (~6cm). There's a single piece vertical version along with the split version. Split version is faster to print if you want to print it in multicolor.
- Extra extended big boy version (~20cm).

See the included assembly video!

**Extended magazines:**
- Normal extended length version.
- Extra extended big boy version.

Disclaimer: I don't think it's possible to find a rubber band that is both elastic enough to allow the loading of the full extended magazines and also still tight enough to pull the last BBs from an almost empty magazine. So the extended magazines are mostly for shits & giggles. But they will of course work with at least the normal amount of BBs.

Tickler SA-6 — Extended Accessories

Extended Barrel Body Vertical.stl

_The model is available for free for all my membership subscribers (and available to buy individually). [Check out my membership tiers!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D)_

---

&nbsp;

---

Check out the [Extended Accessories pack](https://than.gs/m/1077108?affiliateCode=Jaatinen3D) for this pistol!

---

Check out the new [Tickler Mini](https://than.gs/m/1258953?affiliateCode=Jaatinen3D), a spring powered shell-ejecting blaster!

---

&nbsp;

This cool looking semi-automatic pistol has a large magazine that holds up to 17 BBs!

**Assembling this requires no glue or bolts or nuts! Apart from the printed parts, you'll only need two rubber bands (10-30mm diameter)!**

See it in action here: https://youtube.com/shorts/2FCBjJJqB3w

Includes a complimentary **Pistol Bullet Weapon Charm**! The weapon charm chain has an end clip that is compatible with all my Ringchaku designs, so you can attach any Ringchaku end to it! Although most of them are probably too big... But stay tuned for more weapon charms in the future!


&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation.

Use supports for *Housing Left*, *Housing Right*, *Magazine Body*, *Trigger* and *Magazine Release*. All others are up to how your printer can handle small bridges and overhangs.

If you use Bambu Studio or OrcaSlicer, a couple of handy print project files with painted parts and good support settings are included as well!

&nbsp;

**Assembly:**
Watch the included assembly video!

---

&nbsp;

_There's been a rumor of a_ charming _little mystery... You should check it out, maybe there's something in it for you? [I've marked it on your map.](https://jaatinen3d.com/arvoitus/)_

bb

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Rutku BB-20 — Fully 3D-printable airsoft shotgun with shells

AF2011 Pistol Keychain — Functional Blaster Toy

M1911 Pistol Keychain — Functional Blaster Toy

Banana Blaster Keychain — Functional Blaster Toy

Tickler SA-6 — Extended Accessories

Tickler SA-6 — Fully 3D-printable semi-automatic airsoft pistol