Ferrari Brakes Lamp

ferrari brakes.stl

AMG Break Lamp

amg brakes.stl

Gridfinity Nippers + Strippers + Pliers Racks

Nipper Holder x6.stl

Planetary Egg Container

**Planetary Egg Container**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned.

**How it works**
The bottom outside shell is the ring gear, the outer top shell is the carrier, and the inner shell is the sun gear.  Rotating the bottom shell  while holding the top shell results in the plant gears rotating inner shell at a 4:1 ratio.  36 teeth of the sun, divided by 12 teeth of the planet, plus one.

**Print instructions**
Its roughly 112mm tall, prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  There is a 4mm hex hole in the sun gear to free it up the gears if necessary. 
**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed, I did so easily with side cutters

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)



Masked Skull - Decoration

Masked Skull - Decoration
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.


Full Size Anatomically-Correct 18-Piece Magnetic Human Skull Model

Full Skull Display model.stl

Messy Mushroom (Gyroid)

Messy Mushroom Cap Gyroid.stl

Gridfinity Templates for Fusion360 (updated 18.03.23)

Easy to use Fusion360 Gridfinity Templates

Also available on my Github: https://github.com/KptnAutismus/KptnAutismus

Gridfinity Templates (Filled in and Hollow) for Fusion360

Gridfinity 4x2 Hex Bit Storage with Tray

Have lots of hex bits? Need somewhere to store them? Then look no further (maybe look further) than my #Gridfinity model for Zach Freedman's storage system. 

Store 84 bits, 14 of them with deeper holes for those longer bits ... ahem. There's a handy-dandy tray at the front for the adaptors and other oddities (just not too many).

4x2 Hex Bit Storage with Tray

Magnetic Drip Tray Planter - Square Poppy

Square Poppy Pot 2.5.stl

Textured Snap Egg (Diamond)

Display only do not print.stl

Chain Link Gridfinity Bin 40mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm:
Chain Link Gridfinity Bin 60mm:
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


Planetary Compartment Container

**Planetary Compartment Container**

This container has three separate compartments, turning the knob on top of the container indexes through the different compartments at a 4:1 ratio. This is done with the use of a planetary gear stage on the bottom of the container.  Turning the knob drives the sun gear which causes the carrier to spin which in this case is the inner dividing cylinder. The 4:1 ratio is a result of the planetary gears rotating quicker around the larger 32 tooth ring gear verses the smaller 12 tooth sun gear.  

The OAL's are 135mm tall by 94mm in diameter. I'm also working on a smaller diameter version that I'll be releasing shortly in a short and tall version. 

This container was derived from the [Mini Planetary Demo Unit]( https://social.thangs.com/m/50395) that I designed to learn more about planetary gears.  Check that one or the [Original Demo Unit]( https://social.thangs.com/m/47634) I made out,  it really helps to better understand how these gears work when you can hold it in your hand. You may find they are more complex than you thought. 

**Print instructions**
Prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  

Printed with 3D Fuel’s [Silver PLA]( https://www.3dfuel.com/products/standard-pla-filament-simply-silver-1-75mm))

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


Skull in Beanie - Home Decor

Skull beany.stl

Gridfinity printer nozzle box

A 1x1 box that can hold 16 m6 nozzle
V6, MK8 and volcano

Hex Sticky Note Gridfinity 2x2x5

Like many of you, sticky notes are a way of life.  Get classy with this Gridfinity Hex Sticky Note Bin.  Holds two pads with a little room to grow.

automotive lighting

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ferrari Brakes Lamp

AMG Break Lamp

Gridfinity Nippers + Strippers + Pliers Racks

Planetary Egg Container

Masked Skull - Decoration

Full Size Anatomically-Correct 18-Piece Magnetic Human Skull Model

Messy Mushroom (Gyroid)

Gridfinity Templates for Fusion360 (updated 18.03.23)

Gridfinity 4x2 Hex Bit Storage with Tray

Magnetic Drip Tray Planter - Square Poppy

Textured Snap Egg (Diamond)

Chain Link Gridfinity Bin 40mm

Planetary Compartment Container

Skull in Beanie - Home Decor

Gridfinity printer nozzle box

Hex Sticky Note Gridfinity 2x2x5

Tank and Tracktor TRACKS for 3D PRINTING (RC)

Vintage Car

Voronoi vase 1

Red Eldtritch Telehorror