Baby Dragon A

Small Turtle Keychain

Serpentes nTopologus Gyroidicus

This “Serpentes nTopologus Gyroidicus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592 


Baby Sloth Fidget with solid legs

BOBslothsolidlegsv2.stl

Articulated Tegu - Argentine Tegu Lizards | Pre-Painted + Optional 6mm Glass Eye Version

Tegu.stl

Corgi Keychain

Lion and Lioness (Personal Use)

lion_v2.stl

Petra the Panthagon

LFC Panthagon.stl

M3D - Flexi Baby Chameleon

M3D-BabyChameleon.stl

Rat 

This little rat has a joint between the head and body that allows it to move.

Articulating Spring Duck

A duck that will sit or stand on your desk

Dapper Dan Duck 

We added a top hat to our sit or stand duck to make it classy. 

Annoying liquor box - 84 screws, for gifting a bottle of liquor, christmas, gifts, for, him

Annoying Liquor Bottle Plated.3mf

 Sleek-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


 Sleek-Eyed Bone Snake (Medium) - Articulated Snap-Flex Fidget

Chibi Corgi 

This little one has a joint between the head and main body. 

Flexi Crochet Snowman

Witch Hat Snappy Cat  - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Pre=Painted 3MF of all Snap-Flex joint tolerances**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.
Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.



**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. 

**Recommended Types of FIlament:**
I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

articulating

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Baby Dragon A

Small Turtle Keychain

Serpentes nTopologus Gyroidicus

Baby Sloth Fidget with solid legs

Articulated Tegu - Argentine Tegu Lizards | Pre-Painted + Optional 6mm Glass Eye Version

Corgi Keychain

Lion and Lioness (Personal Use)

Petra the Panthagon

M3D - Flexi Baby Chameleon

Rat

Articulating Spring Duck

Dapper Dan Duck

Annoying liquor box - 84 screws, for gifting a bottle of liquor, christmas, gifts, for, him

Sleek-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

Chibi Corgi

Flexi Crochet Snowman

Witch Hat Snappy Cat - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

Cute Cat

Wombat Fidget

Fluffy Tail Cute Flexi Puppy - Toy / Keychain