**Print-In-Place, No Supports, Articulating Fidget Toy**
**Bambu 3MF For Multicolor Printing**
 
Looking to hang out with your gnomies on St. Patricks Day?

This St Patty's Flexi Gnome is getting some stretching in to prepare for the celebrations.


He has 2 separate poses.  He can:
- Sit in a split-leg position
- Stand straight up on 2 legs


While waiting on some test prints of more complicated Snap-Flex designs, I started playing around with simpler flexis for sculpting practice.  I realized that there are other ways to make fun posable models, and that not ALL of my models need to be Snap-Flex designs.

**Check out some other simple flexis here:**

**Flexi Pug - Articulated Dog, Style #1: https://than.gs/m/1027312
Flexi Pug - Articulated Dog, Style #2: https://than.gs/m/1027678
Flexi Pug - Articulated Dog, Style #3: https://than.gs/m/1027452**

For more fun, check out the regular version and another St. Patrick's Day design:
**St Patty's Flexi Gnome - Articulated Fidget Toy: https://than.gs/m/1030343**
**Little Lucky Rubber Ducky, a St. Patty's Leprechaun Duck - https://than.gs/m/1024753**

Models like this give me an opportunity to continue building my skillset and releasing models while I wait for my printers to finish prototypes of more complex designs.


Please be sure to check out my other articulated dragon and articulated snake designs.

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim


Multicolor St Patty's Flexi Gnome - Articulated Fidget Toy (Bambu 3MF)

StPatricks_StPattysLeprechaunGnome_Multicolor.3mf

**Print-In-Place, No Supports, Articulating Fidget Toy**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**
   
**Check out the latest Mimetics3D Model, [Little Lucky Rubber Ducky](https://than.gs/m/1024753)**

_A little snek who slithers so 
surveys the scene and says that though
the seasons slip swiftly away 
some other things are here to stay._ 
 

Slick the Snek is super excited to slip into the Snap-Flex collection.  

Slick was originally going to be showing off the new **Snap-Flex Twist** experimental joint, but his buddy **[Sly - Articulated Snake](https://than.gs/m/1025111)** is doing that instead.

Slick is the 20th creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

 
**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 
 
Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart
 
**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018173
**Medium Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018181
**Loose Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018185

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

This mini little monster is excited to bring a bit more love into your life

**Other Models:**
For another articulated Valentine's friend, check out this little Heart Axolotl:

**Tight Tolerance Alotl Love:**
https://than.gs/m/994472
**Medium Tolerance Alotl Love:**
https://than.gs/m/994480
**Loose Tolerance Alotl Love:**
https://than.gs/m/994484

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Slick - Articulated Snake Snap-Flex Fidget (Loose Joints)

Slick_articulatedSnake_Loose.stl

🎉 Exciting News! 🎉

I’m thrilled to re-enter my Bendy Beast model, which previously won first place, into the Thangs Throwback Contest! 🏆

Why You’ll Love the Bendy Beast:

Universally Compatible: Tailored to fit most printers, the Bendy Beast is ready to make its mark in any maker’s collection.
Newbie-Approved: It’s the perfect project for those just dipping their toes into the vibrant waters of 3D printing.
Zero Hassle: Say goodbye to supports! This fully articulated design prints smoothly, letting you focus on the fun.

COPYRIGHT KINDNESS: At Mesh Mayhem, we cherish creativity and respect ownership. Our designs, including the Bendy Beast, are copyrighted for personal enjoyment.

We encourage personal use and sharing your journey with us, but commercial use requires a special touch – a Mesh Mayhem commercial license. So, if you’re looking to sell, let’s make it official! Our membership offers you the license you need, plus a treasure trove of perks.

Join us, and let’s create magic together!

Please, no commercialization without a license. Let’s play fair and have fun!

Did we catch your eye? We’d love to see your Bendy Beast come to life! Share your prints in the comments and spread the joy.

BendyBeast Articulated Dragon #Throwback

Articulated Dragon BendyBeast Mesh Mayhem.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looking to hang out with your gnomies on St. Patricks Day?

This St Patty's Flexi Gnome is getting some stretching in to prepare for the celebrations.


He has 2 separate poses.  He can:
- Sit in a split-leg position
- Stand straight up on 2 legs


While waiting on some test prints of more complicated Snap-Flex designs, I started playing around with simpler flexis for sculpting practice.  I realized that there are other ways to make fun posable models, and that not ALL of my models need to be Snap-Flex designs.

**Check out some other simple flexis here:**

**Flexi Pug - Articulated Dog, Style #1: https://than.gs/m/1027312
Flexi Pug - Articulated Dog, Style #2: https://than.gs/m/1027678
Flexi Pug - Articulated Dog, Style #3: https://than.gs/m/1027452**

Additionally, check out another St. Patrick's Day design:
**Little Lucky Rubber Ducky, a St. Patty's Leprechaun Duck - https://than.gs/m/1024753**

Models like this give me an opportunity to continue building my skillset and releasing models while I wait for my printers to finish prototypes of more complex designs.


Please be sure to check out my other articulated dragon and articulated snake designs.

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim


St Patty's Flexi Gnome - Articulated Fidget Toy

StPatricks_StPattysGnome.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**
 
 
**Check out the latest Mimetics3D Model, [Little Lucky Rubber Ducky](https://than.gs/m/1024753)**  

_A little snek who slithers so 
surveys the scene and says that though
the seasons slip swiftly away 
some other things are here to stay._ 


Slick the Snek is super excited to slip into the Snap-Flex collection.  

Slick was originally going to be showing off the new **Snap-Flex Twist** experimental joint, but his buddy **[Sly - Articulated Snake](https://than.gs/m/1025111)** is doing that instead

Slick is the 20th creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

 
**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 
 
Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart
 
**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018173
**Medium Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018181
**Loose Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018185

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

This mini little monster is excited to bring a bit more love into your life

**Other Models:**
For another articulated Valentine's friend, check out this little Heart Axolotl:

**Tight Tolerance Alotl Love:**
https://than.gs/m/994472
**Medium Tolerance Alotl Love:**
https://than.gs/m/994480
**Loose Tolerance Alotl Love:**
https://than.gs/m/994484

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Slick - Articulated Snake Snap-Flex Fidget (Medium Joints)

Slick_articulatedSnake_Medium.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**
    
**Check out the latest Mimetics3D Model, [Little Lucky Rubber Ducky](https://than.gs/m/1024753)**

_A little snek who slithers so 
surveys the scene and says that though
the seasons slip swiftly away 
some other things are here to stay._ 


Slick the Snek is super excited to slip into the Snap-Flex collection.  

Slick was originally going to be showing off the new **Snap-Flex Twist** experimental joint, but his buddy **[Sly - Articulated Snake](https://than.gs/m/1025111)** is doing that instead

Slick is the 20th creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

 
**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 
 
Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart
 
**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018173
**Medium Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018181
**Loose Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018185

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

This mini little monster is excited to bring a bit more love into your life

**Other Models:**
For another articulated Valentine's friend, check out this little Heart Axolotl:

**Tight Tolerance Alotl Love:**
https://than.gs/m/994472
**Medium Tolerance Alotl Love:**
https://than.gs/m/994480
**Loose Tolerance Alotl Love:**
https://than.gs/m/994484

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


articulated dragon

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Multicolor St Patty's Flexi Gnome - Articulated Fidget Toy (Bambu 3MF)

Slick - Articulated Snake Snap-Flex Fidget (Loose Joints)

BendyBeast Articulated Dragon #Throwback

Slick - Articulated Snake Snap-Flex Fidget (Medium Joints)

Slick - Articulated Snake Snap-Flex Fidget (Tight Joints)