OP-1 BestCase Decksaver and Stand // Waveform (multipass multicolor)

e-case.stl

Gridfinity Project 45 - Light Base

Gridfinity baseplate project 45.stl

OP-1 BestCase Decksaver and Stand // Wicker

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

OP-1 BestCase Decksaver and Stand // Wide Awake [Red Eye Series] 

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

This design comes from my Red Eye Series, which consists of 3 original art pieces inspired by sleepless nights spent searching for inner peace while making tunes.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Hose Finger - Garden Hose Nozzle

Hose_Finger.stl

Blink Mini 2(+) Glass Mounts for Windows and 3D Printers 

blink_mini_2_glass_mount.3mf

Aeroponic Tower Plant Pod, Angled For Water Catch, Clip-In Design, Vertical - 3D Printable STL File

aeroponic_tower_plant_pod_angled_for_water_catch_clipin_design_vertical_garden.stl

angled

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

OP-1 BestCase Decksaver and Stand // Waveform (multipass multicolor)

Gridfinity Project 45 - Light Base

OP-1 BestCase Decksaver and Stand // Wicker

OP-1 BestCase Decksaver and Stand // Wide Awake [Red Eye Series]

Hose Finger - Garden Hose Nozzle

Blink Mini 2(+) Glass Mounts for Windows and 3D Printers

Aeroponic Tower Plant Pod, Angled For Water Catch, Clip-In Design, Vertical - 3D Printable STL File