Is it digital, or is it analog?  Well it's some combination of the two! The rack driven 7 segment display is a fully 3D printed mechanical desk piece that is equal parts satisfying and bewildering.  Turn the top dial to rotate a series of 14 cams which push on a rack and pinion system to reveal a number.  Operate is manually, or add an optional servo motor to the back and have the thing run on it's own.

You could even throw 4 of them side by side to create a clock!  Add another two and get the seconds.  Give one a randomized number generator and it becomes a dice!  Endless possibilities!

The STL File:

Prints on all standard 3d printers, requires no additional tools or assembly, and assembles in seconds.
For servo attachment (not necessary), it used these servos: https://geni.us/G8ArjNg

Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18% 
Total Material: ~190g

Can print on any sized 3D printer.

Rack Driven 7 Segment Display

Build 2 - Cams and Housing - 125g.stl

Rack Side (x4).stl

Top Plate.stl

Detent.STL

Cam (Larger Clearance)_Bottom Inverse.STL

Cam (Larger Clearance)_Bottom Left Inverse.STL

Cam (Larger Clearance)_Bottom Left.STL

Cam (Larger Clearance)_Bottom Right Inverse.STL

Cam (Larger Clearance)_Bottom Right.STL

Cam (Larger Clearance)_Bottom.STL

Cam (Larger Clearance)_Middle Inverse.STL

Cam (Larger Clearance)_Middle.STL

Cam (Larger Clearance)_Top Inverse.STL

Cam (Larger Clearance)_Top Left Inverse.STL

Cam (Larger Clearance)_Top Left.STL

Cam (Larger Clearance)_Top Right Inverse.STL

Cam (Larger Clearance)_Top Right.STL

Cam (Larger Clearance)_Top.STL

8mm C-Clamps (x6).stl

Central Clock Connector.stl

Dot Centres.stl

Dot Outlines.stl

Base Piece (For 2 Side by Side Modules).STL

Central Counter Connectors (to connect base pieces together).stl

analog

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Rack Driven 7 Segment Display