Duo Planter Type 4

Duo Planter Type 4 Base.STEP

Ultimate Bag Clip

Ultimate Bag Clip 1.stl

Ludo Deviled Egg clicker - Egg Fidget Clicker - 3d Printed Ludo Fidget

Eggs white.stl

Basic Negative Parts for customizing fabric patterns

Circle Negative Part.stl

Baby Yoda STL – Chibi Alien Jedi Figure – 3D Printable Model

BabyYoda(grogu)-Layerables.stl

Pokeball V1

Bottom Inn.stl

Transformer Chess Piece

This print-in-place chess piece transforms into any of the six chess pieces: pawn, rook, knight, bishop, king, or queen. 
See here for video: https://youtu.be/0cj6SbYCWAs
Each of the side sections flip up and lock into place to form a rook, knight, bishop, king, or queen. Leave them all down and you have a pawn.
Print sixteen in each colour and you’ll have a set!
OK, not to most efficient way to acquire a chess set, but super fun to change a pawn into queen when your opponent isn’t looking.
Proper sizing of the ball is important for the flip-up sections to snap into place. If you print one piece at a time at regular speed, the filament won’t have time to solidify while printing the ball and it will likely become deformed. You can avoid this by slowing down your print speed or printing more than one at a time to allow time for the filament to solidify between layers.
#3Dprint #thangs3d #pdo #chess #pawn #rook #bishop #knight #king #queen #printinplace #transformer


Crystal Headphone Stand

Crystal_Headphone_Stand-Base_Holoprops.stl

Donald Trump.stl

Rivian Compressor Door Lock

Are you having the same problem with your Rivian compressor door flapping open when driving?  I was, so I built this 3D print that goes into the gear guard cable spot, and holds the flap from opening.

Baby Dragon A Keychain

RISKY BUSINESS ALF  Z-MINIS

risky business alf.stl

wombat

(vombad).3mf

Sunflower Hand Fan (STL Format) | #pdo #summer | NoahMillerDesign

This is both a decorative and functional sunflower themed hand fan that I designed for the #pdo #summer 3D modeling challenge.
Indiana summers can get quite hot, so having a collapsible fan in your bag can be a life-saver!

While I was brainstorming what to model for the challenge, I tried to come up with ideas that I thought would be fun to model, easy to 3D print, and usefully functional on a daily basis. I came  up with a few different concepts, some of which were quite elaborate, however I only had one day left until the challenge was over. With this in mind, I narrowed down the list until I settled on a collapsing hand fan. Even with the limited timeframe, I still wanted to push myself and create a hand fan design that was collapsible but was also made with only 3D printed parts. Additionally, as with most of my designs, I wanted all of the parts to be 3D printable without any support material.

I got started on the initial design and as the basic structure of it was coming together, I began thinking about what artistic flair I wanted to add. A number of different summer-y themes came to mind, but as I looked at the form and shape that I had so far, it really looked like a flower to me. I remembered how much my wife loves sunflowers, so I thought that would be the perfect artistic design to incorporate into the model.

This model is designed to be printed as separate parts, and then assembled. 
The parts that you will need to print to create the full assembly are:
- Cap (x1)
- Top Petal (x1)
- Middle Petal (x6)
- Bottom Petal (x1)

Each of the parts for dual extrusion are prefixed “Dual” and also indicate whether or not it is the base part or the overlay for the part.
Each of the parts for single extrusion are prefixed “single” and already have the base and overlay combined together into a single part.
The cap is the same for both the dual and single versions.

All of the components are designed to be able to be printed using a dual extruder 3D printer so that two different colors can be used. For the Dual version each petal is split into two bodies; the base of the petal and the artistic overlay that accompanies it. For the Single versions, each model can be printed with a single extruder with a single color, or with a single extruder and a paused color change at the 2mm layer height to still achieve a two-color effect.

The model is assembled by first pressing each of the six (6) Middle Petals onto the post that is part of the Bottom Petal. Next, the Top Petal can be pressed onto the same post. Lastly, fit the cap onto the top of the post such that the nub inside the cap fits into the notch in the post. Press the cap as far down as it will go and then rotate the cap until it snaps past the locking mechanism. Once the cap is locked onto the post, the slots and pegs on the front and back of each petal will keep the fan from extending too far or opening the wrong direction.

You can take a look at the renders in the “Community Uploads” section to see what the assembly looks like in it’s opened and closed positions.

a

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Duo Planter Type 4

Ultimate Bag Clip

Ludo Deviled Egg clicker - Egg Fidget Clicker - 3d Printed Ludo Fidget

Basic Negative Parts for customizing fabric patterns

Baby Yoda STL – Chibi Alien Jedi Figure – 3D Printable Model

Pokeball V1

Transformer Chess Piece

Crystal Headphone Stand

Donald Trump.stl

Rivian Compressor Door Lock

Baby Dragon A Keychain

RISKY BUSINESS ALF Z-MINIS

wombat

Sunflower Hand Fan (STL Format) | #pdo #summer | NoahMillerDesign

Doggy Corgi

Gridfinity Baseplates Optimized for Strike Plates and Bridges

Cardinal

2x1x0.75 CU - Simple Walls - Multibin Shell

Gear Loot Chest

Modular Organizer with Interchangeable Trays