Thing skull

Thing skull.3mf

Free Plague Guard

PlagueSoldier_Free.stl

Copper Cauldron

Here is the file for the Copper Cauldron

its a simple Cauldron for Halloween that prints with Zero supports for your decorations.

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee

https://www.buymeacoffee.com/bugman140

 

Copper cauldron

Scarlet Witch Bust

bust.stl

The all seeing leaf

The all seeing leaf..stl

Witch Hat Snappy Cat  - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Pre=Painted 3MF of all Snap-Flex joint tolerances**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.
Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.



**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. 

**Recommended Types of FIlament:**
I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Witch Hat Snappy Cat  - Prepainted 3MF for Bambu Users (All Tolerances)

Mini Witch - Sculptember Model #7

Witch.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Medium Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Witch Lair Clicker Keychain Fidget Toy Bundle

CAULDRON - BASE.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Loose Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Medium Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940296

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Witch 2D Stained glass art

witch.stl

Triple Coven - Light

coven_-_no_heads.stl

The forbidden book holder

The forbidden book holder.stl

Cat Statue (Pre Supported)

Cat_Statue.stl

Gnome Witch - Gnomish Potion Witch Multi Part #throwback

body.stl

12oz Crow Queen  Can Cozy Dice Towers

12oz Crow Queen.stl

Bogomil Levski wand - Harry Potter Durmstrang Institute

OBJ_Bogomil_Levski_wand_3Demon.obj

Rubber Band Wand (Spike)

GEARXYZ RBG Wand Spike BambuSlicer.3mf

Simple Potion Bottle

SimplePotionBottle.stl

Poison Apple Snail- (Little Big Head Series)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***

Witch

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Thing skull

Free Plague Guard

Copper Cauldron

Scarlet Witch Bust

The all seeing leaf

Witch Hat Snappy Cat - Prepainted 3MF for Bambu Users (Snap-Flex: All Tolerances)

Mini Witch - Sculptember Model #7

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Witch Lair Clicker Keychain Fidget Toy Bundle

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

Witch 2D Stained glass art

Triple Coven - Light

The forbidden book holder

Cat Statue (Pre Supported)

Gnome Witch - Gnomish Potion Witch Multi Part #throwback

12oz Crow Queen Can Cozy Dice Towers

Bogomil Levski wand - Harry Potter Durmstrang Institute

Rubber Band Wand (Spike)

Simple Potion Bottle

Poison Apple Snail- (Little Big Head Series)