Learn the basics of the Tiles and get a taste of Multiboard. This video tutorial shows you how to assemble everything: https://youtu.be/Oge0fgVxRHY

**Printing Guidelines:**

The printing orientation is as provided in the files. The prints have been designed to be “3 wall perimeters” in wall thickness. Printed at a layer height of 0.2mm. They don’t need printing supports. Use the default 15% infill. Your printer will need to be able to bridge gaps of up to 30mm for some designs.

If you print the stacked tiles, watch this tutorial first to get your settings right: https://www.youtube.com/watch?v=xs2urfM0MRM

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io

Multiboard Learning Pack

Plate 1A - Tiles.stl

Plate 1B - Stacked Tiles.stl

Plate 3 - Tools and Accessories.stl

Plate 2 - Small Tile.stl

Plate 3 - Mounts.3mf

If you want support me or sell physical prints of my designs,
please become a Paid Member

patreon.com/Yuskovych

Assembling: https://www.youtube.com/watch?v=Vt0Cvrj8lN0

Sunset Motion Lamp is a moving lamp that creates a sunset effect using interchangeable scenic backgrounds.

The lamp can be used both as a wall lamp and as a desk lamp.
It can be easily transformed between these two modes, as shown in the Instagram video.

Backgrounds
The first release includes 3 backgrounds.
More backgrounds will be added later.

Additional hardware (not printed)
Bambu Lab 60mm lamp
Reed switch
Magnet D4 H2

Use 2screws or adhesive tape for wall version.

PRINTING NOTES
All parts print normally, except the backgrounds.
Make sure your filament is translucent good.

Use:

10 bottom layers
10 top layers
This is required to achieve proper light diffusion.

If your background is too transparent print the Diffuser part
Place the Diffuser onto the lamp
The Diffuser file is included in the download

Sunset Motion Lamp and screens

Screens.3mf

Hold onto your butts! 
This shadow box features the famous T-Rex escape scene from the original Jurassic Park movie. Each layer is 3D printed in a separate color and then stacked on top of each other to create the illusion of depth. Add the toy vehicle to make it more like a diorama. The exterior features screw holes in the back and top if you want to hang it on a wall. It also looks great just sitting on a desk or shelf. 

 

Assembly Instructions
Print each part using the color recommendations provided. Print out 6 of the square spacers. PLA filament was used but other materials may work as well. You will need white paper, scissors, and glue. 

 

1.) Lay box shell on flat surface with opening face up. Make sure screw holes are positioned upright. 

2.) Cut out small piece of white paper to fit into shell. Glue into place. This white layer will serve as the moon. 

3.) Place blue sky layer inside shell on top of the white paper. Glue into place. Wait for glue to dry. 

4.) Add spacers to corners. Glue into place. Wait for glue to dry. 

5.) Add square spacer layer. Glue into place. Wait for glue to dry. 

6.) Repeat steps with the remaining layers in this order: Clouds, Mountains, Plants Back, Dino, Plants Front, Fence. Be sure to place the 4 corner spacers and the square spacer between each layer. Glue everything in place. Wait for glue to dry between each layer. 

7.) Add the lid with glue to seal it shut. Wait for everything to dry. 

8.) Stand the box up and place the car ramp in front of it with your choice of vehicle (not included). 

 

You can also make the secondary version of this diorama by not using any of the spacers. That way there is more room inside the box to fit both the ramp and the vehicle!

Jurassic Shadow Box Diorama

Jurassic Shadow Box.3mf

7 years after releasing my most popular 3D model, here is the newly redesigned KROMATIK vase! This version has been refined for cleaner printing and overall finesse.

The KROMATIK Collection features sweeping angular channels that capture the surrounding light, shadow, and colors in a striking manner. This reflection grounds the pieces within their environment while their dramatic forms make them stand out.

KROMATIK 002 was designed for printing in 'vase mode'. When printing at 100% scale I recommend a 0.8 mm extrusion width and 5-10 solid bottom layers for a strong and watertight model. Of course you're always encouraged to experiment with scale and settings... you may discover something special! 

There is also a hollowed version with 1.2 mm wall thickness for standard printing.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA Marble filament](https://bit.ly/bamFIL).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_1. 

Wall

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Multiboard Learning Pack

Sunset Motion Lamp and screens

Jurassic Shadow Box Diorama

KROMATIK Vase 002