Electrician Can Holder / Koozie

Electrician.stl

Cable Organizer Ties (Super easy - 150+ sizes)

Cable Organizer Tie.3mf

Hexagon Lid (6-pointed) for Desk Grommet System

Desk Grommet System | Base Screw & Nut: https://than.gs/m/924318

Over-Engineered Rope Winder

Winder Rack_Standard.3mf

Wireframe Ambiguous Cube // POV Illusion

largeWire_noStand.stl

Ergonomic Cable Organizer | Wire Winder | Reel

Ergonomic_Cable_Organizer.stl

Cable Management Hook

CableManagementHookx1.stl

Thin Wire Stripper

Thin Wire Stripper.stl

Spool for Fairy Lights String

spool for fairy lights.3mf

MJS.ART Earpod Wrap

earpod-wrap-super-simple_v3.3mf

Bobbin Thread/Wire Winder

bobbin_winder_kwerkshop.stl

Wire Staple Holder

This is something I made for my work, to help hold staples with magnets while you hammer them in. Sometimes it's really a pain in the rear to hold the staple and wire and hammer it into the wall all at the same time. A normal 12/2 or 14/2 staple should fit in the grooves just right so you can hit it with your hammer and not worry about smacking your hand or the staple falling.

These are the magnets I used for this device (you can also find them on banggood.com, 2x10x20mm magnets):

https://amzn.to/3dFwZnV

Cable Clips

Cable Clip 44mm.step

Soldering wire stand (Print in place)

Really proud of this one. Soldering wire stand with print in place hinge and metal shaft slid into a hole. supports most sizes of soldering wire spools, many spools can be installed at once. If you want to access the spools, just lift the metal shaft up. If a small wire spool is installed, there is always more room for insulation tape, scotch tape etc
it works incredibly smoothly and is very strong. the bottom of the stand is corrugated so it grips nicely to a rough desk but there are also round holes for rubber pads.
The middle section has all the main lead exposure health hazards noted down for when you'll inevitably forget about them from all the lead fumes you have been inhaling. The sides have tin and lead elements decals.

_The model is supposed to be printed laying down with the hinge's shaft touching the build plate. The orientation here is very important so that the hinge works properly. I printed mine with .6mm nozzle at .14mm layer height and 10% infill. it's very strong and the letters & decals and perfectly readable. No brim and only one support for the shaft slot on the left side.
After printing, a ~10cm long, 10mm wide shaft is supposed to be pushed into the hole above the hinge. If you dont have a metal shaft, you can always 3d print one though it wont look as neat._

WireChannel Turn (WIP)

Imagine an easy way to keep your wires to the body plate of your FRC robot. Well, here you go? Still work in progress and working out a few problems. Feel free to put feedback in the comments so I can troubleshoot.

Antenna Mount for Vex V.5 Receiver

The antenna holder for the V.5 receiver kept breaking the wire, so I designed one so that the antenna doesn't have to bend sharply.

Cable Hang Collection Parametric 

5 screw 30mm.step

5/16" Post, Ribbon Cable Mount (Raspberry Pi Cam)

PCAM-RIBN-.3125-90.STL

5mm wire clip.stl

Wire Basket Feet (for IKEA AURDAL, KONSTRUERA, JONAXEL, HJÄLPA, KOMPLEMENT (old version), etc...)

KOMPLEMENT Feet.stl

WIRE

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Electrician Can Holder / Koozie

Cable Organizer Ties (Super easy - 150+ sizes)

Hexagon Lid (6-pointed) for Desk Grommet System

Over-Engineered Rope Winder

Wireframe Ambiguous Cube // POV Illusion

Ergonomic Cable Organizer | Wire Winder | Reel

Cable Management Hook

Thin Wire Stripper

Spool for Fairy Lights String

MJS.ART Earpod Wrap

Bobbin Thread/Wire Winder

Wire Staple Holder

Cable Clips

Soldering wire stand (Print in place)

WireChannel Turn (WIP)

Antenna Mount for Vex V.5 Receiver

Cable Hang Collection Parametric

5/16" Post, Ribbon Cable Mount (Raspberry Pi Cam)

5mm wire clip.stl

Wire Basket Feet (for IKEA AURDAL, KONSTRUERA, JONAXEL, HJÄLPA, KOMPLEMENT (old version), etc...)