Every time I scooped ice from my refrigerator, ice would fall out the back of the ice bin and end up in the freezer. This Ice Maker Rear Baffle is a simple, drop-in solution to that problem.

The baffle slides into the rear of the ice tray and acts as a physical barrier, keeping ice contained while scooping. It does not interfere with normal ice production or dispensing and can be easily removed if needed.

This is a small, practical quality-of-life upgrade designed to fix an annoying everyday problem with a fast, easy 3D print.

Features
- Prevents ice from spilling out the back of the ice bin
- Simple slide-in / drop-in design
- No tools or permanent modifications required
- Does not block ice production or dispensing
- Easy to remove, reprint, or remix

Printing Notes
- Designed for FDM 3D printing
- PETG recommended for durability in cold environments
- No supports required
- Print orientation shown in preview images
Fit may vary depending on refrigerator model — scaling or minor remixing may be required

Compatibility
This model was designed around a Samsung standard rear-loading ice bin.
Due to variations in refrigerator designs (including different Samsung models), fitment may vary.  Test-fit before regular use and adjust as needed.

Food Safety Note
This part sits inside the ice bin and does come into contact with ice, which is considered food.
This model is not provided as a certified food-safe product. As with most 3D-printed parts, suitability depends on material choice, printing conditions, and maintenance.

If you choose to print and use this model:
You are responsible for selecting materials you are comfortable using
Clean and inspect the part periodically
Replace the part if it becomes scratched, cracked, or damaged
This model is shared as a DIY solution so users can make their own informed decisions.

License
Personal Use + Attribution (No Commercial)
Free to print and use for personal, non-commercial purposes
Remixes and sharing are allowed with attribution
Commercial use, resale, or paid distribution is not permitted

See full license text included with the model.

Why I Made This
This is one of those tiny prints that solves a daily annoyance with just a few grams of filament. If you remix it or adapt it for a different fridge model, feel free to share — I’d love to see what you come up with.

Handy Link:  [IceBaffle.com](https://IceBaffle.com)

Useful 3D Prints

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads