This snap-together, scalable, modular USB drive storage system uses a rotating 2-stage spring-driven push-push style system to elevate your USB drives and store them with style.  You can use it to store an unlimited number of drives as well as configure the structure with or without separating walls and end walls.  

The device is 100% printed; no hardware or metal springs are required.  The compliant springs built into the design are resilient enough for repeated use.  The end wall can be used on either end, both ends or in between the USB drive holders.

I will post a video showing the assembly shortly.

**Limited-Time Offer**
Get it for FREE now! Please collect, like, and download this model to support me in league competitions. Your support makes a huge difference—thank you!

Print Settings
For the best results, use these settings:
* Material: PLA (this design is optimized for PLA)
* Nozzle: 0.4mm
* Layer Height: 0.2mm
* Line Width: 0.4mm
* Wall Count: 4 (1.6mm)
* Top and Bottom Layer Count: 5
* Detect Thin Walls: ON
* Wall Generator: Arachne
* Infill: 40% (Cubic)
* Brim: No
* Support: No

UPDATE 2025-01-08: 
- It was just brought to my attention that the receiver part I uploaded did not have the support piece included.  I have re-uploaded that now and it should print much better with that.  Please download it again and print the new part titled "USB Rack 1v00c receiver with support.stl". 
- I have also now added an XL version of the base and wall.  These parts are indicated with the XL in their file name.  The original design will accommodate a USB drive body of up to 42mm and the XL will accommodate a body of up to 66mm in length.  

Additional Info
Visit my blog for more details and other exciting designs: https://www.logicalplanet.com/





Usb

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

USB Drive Storage Rack (Modular, Push to Open)