1x1 CU Breadboard - Multibin Top

1x1 Breadboard - Multibin Top.stl

Low Poly Mother's Day Sculpture - Mother and Child

Mothers-Day_Low-Poly.stl

Drill Dust Collector (use with or without a vacuum - incl. alignment marks)

Base.stl

Kaiju 8 bust (Pre-Supported)

bust.stl

Mask holder

Mask holder_PipeCox.stl

Imperius bust (Pre-Supported

Torso.stl

Samsung Galaxy S21+ Phone Case

S21+ v13.stl

Sephiroth -Final Fantasy 7

ff7-sephiroth.stl

Ice Dragon (Pre-Supported)

Ice_dragon.stl

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: https://than.gs/m/933823

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


USB Cable Clips - 3 Sizes

USB Cable Clip Small.stl

Sunflower Hand Fan (STL Format) | #pdo #summer | NoahMillerDesign

This is both a decorative and functional sunflower themed hand fan that I designed for the #pdo #summer 3D modeling challenge.
Indiana summers can get quite hot, so having a collapsible fan in your bag can be a life-saver!

While I was brainstorming what to model for the challenge, I tried to come up with ideas that I thought would be fun to model, easy to 3D print, and usefully functional on a daily basis. I came  up with a few different concepts, some of which were quite elaborate, however I only had one day left until the challenge was over. With this in mind, I narrowed down the list until I settled on a collapsing hand fan. Even with the limited timeframe, I still wanted to push myself and create a hand fan design that was collapsible but was also made with only 3D printed parts. Additionally, as with most of my designs, I wanted all of the parts to be 3D printable without any support material.

I got started on the initial design and as the basic structure of it was coming together, I began thinking about what artistic flair I wanted to add. A number of different summer-y themes came to mind, but as I looked at the form and shape that I had so far, it really looked like a flower to me. I remembered how much my wife loves sunflowers, so I thought that would be the perfect artistic design to incorporate into the model.

This model is designed to be printed as separate parts, and then assembled. 
The parts that you will need to print to create the full assembly are:
- Cap (x1)
- Top Petal (x1)
- Middle Petal (x6)
- Bottom Petal (x1)

Each of the parts for dual extrusion are prefixed “Dual” and also indicate whether or not it is the base part or the overlay for the part.
Each of the parts for single extrusion are prefixed “single” and already have the base and overlay combined together into a single part.
The cap is the same for both the dual and single versions.

All of the components are designed to be able to be printed using a dual extruder 3D printer so that two different colors can be used. For the Dual version each petal is split into two bodies; the base of the petal and the artistic overlay that accompanies it. For the Single versions, each model can be printed with a single extruder with a single color, or with a single extruder and a paused color change at the 2mm layer height to still achieve a two-color effect.

The model is assembled by first pressing each of the six (6) Middle Petals onto the post that is part of the Bottom Petal. Next, the Top Petal can be pressed onto the same post. Lastly, fit the cap onto the top of the post such that the nub inside the cap fits into the notch in the post. Press the cap as far down as it will go and then rotate the cap until it snaps past the locking mechanism. Once the cap is locked onto the post, the slots and pegs on the front and back of each petal will keep the fan from extending too far or opening the wrong direction.

You can take a look at the renders in the “Community Uploads” section to see what the assembly looks like in it’s opened and closed positions.

Sunflower-Hand-Fan-Open-NMD.stl

Adorable Tom and Jerry Collectible Figurine

TomAndJerry.stl

Remix of Multiboard Angled Drill Holder

Remixed from the "HSW Angled Drill Holder" by kstuken on Printables.com - https://www.printables.com/model/498594.  All I did was move the holes to accommodate Mutliboard snaps.  I only remixed the wider of the two mounts from the original.
M3 screws about 14mm-16mm long and M3 Hexnuts required for assembly.

U

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

1x1 CU Breadboard - Multibin Top

Low Poly Mother's Day Sculpture - Mother and Child

Drill Dust Collector (use with or without a vacuum - incl. alignment marks)

Kaiju 8 bust (Pre-Supported)

Mask holder

Imperius bust (Pre-Supported

Samsung Galaxy S21+ Phone Case

Sephiroth -Final Fantasy 7

Ice Dragon (Pre-Supported)

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

USB Cable Clips - 3 Sizes

Sunflower Hand Fan (STL Format) | #pdo #summer | NoahMillerDesign

Adorable Tom and Jerry Collectible Figurine

Remix of Multiboard Angled Drill Holder

Desk Cable Management Holder

Vintage Lantern Candle Holder Set / No Supports

Desktop Dumpster Fire

Spiral Lamp

Torchic Xmas - Pokemon - Fan Art

Penny Bear