This dual-color cracked skull design can be printed with translucent filament to let light shine through the cracks! 

See here for video: https://youtu.be/uCC3UsVzpis 


Cracked Skull

Skull.stl

These dual-color cracked vase designs can be printed with translucent filament to let the light shine through the cracks! The distribution of cracks gives the appearance of a bullet hole through the vase.

See here for video: https://youtu.be/iKBhvfeoSeM 

Download the set:
Small: https://than.gs/m/887994 
Medium: https://than.gs/m/887997 
Large: https://than.gs/m/887999 



Bullet Hole Vase (Large)

Vase 50x90.stl

Bullet Hole Vase (Medium)

Vase 50x70.stl

Bullet Hole Vase (Small)

Vase 50x50.stl

Three sizes of “Ice Bubbles” designed for spiralized printing to maximize translucency and minimize material and print time. These are great prints for your clear or translucent filaments!

See here for video: https://youtu.be/xJ5POHSJL1I 

Files are provided for 30mm, 40mm, and 50mm diameter balls. You will need to print two pieces to make one ball. When printed with a 0.5mm nozzle, the balls require 3g, 5.4g, 8.4g of filament. That means 1kg of filament you could make approximately 333 small Ice Balls!

Here are some recommendations for spiralized printing:
- Use thick layer heights, 0.2mm or greater
- Set your “Bottom Layer” to 1
- Try using a skirt for bed adhesion, but if that is not working then try a brim. You will just have to remove the brim afterwards
- If you get funny stringing on the top layer, try moving the z-seam alignment around

AI generated description:

Explore the exquisite collection of 3D models on Thangs.com, featuring "Ice Bubbles" designed by DaveMakesStuff. These models bring a touch of novelty to your home & garden decorations, incorporating a unique element of translucency due to spiralized printing methods. The design minimizes both print time and material consumption, making it an efficient choice for 3D printing enthusiasts. These models are especially attractive when printed with clear or translucent filaments, further enhancing their ice bubble visuals.

The ice bubbles come in three different sizes: 30mm, 40mm, and 50mm, each requiring two printed pieces to complete a single ball. With a 0.5mm nozzle, the balls require 3g, 5.4g, and 8.4g of filament respectively. This means that with a single 1kg filament roll, one can produce approximately 333 small Ice Balls, perfect for decorating your space or hosting a themed party!

It is recommended to use thick layer heights of 0.2mm or greater for spiralized printing. Customize your settings to a 'Bottom Layer' of 1. For bed adhesion, you may use a skirt, but a brim can be adopted if the skirt proves ineffective, with the brim being removable afterwards. If you encounter stringing on the top layer, try adjusting the z-seam alignment for better results. Utilize these unique 3D models to bring a cool aesthetic to your home and garden décor. Check the images to have a better understanding of the final product and achieve the best-printed output for these unique Ice Ball designs.

Ice Bubbles

Ice Bubble 50mm.stl

A model of a small incandescent light bulb designed for printing with clear resin. The inner wiring of the light bulb only becomes visible when printed with clear resin.

See here for video: https://youtu.be/BRS2gbPtF_M 

To print, raise the object 5-6mm off the build plate as oriented and generate supports to the bottom and up along the threaded portion. There is a drainage hole leading up from the bottom and into the lightbulb cavity. This hole essential to prevent suctioning during the printing of the bulb and to allow uncured resin to drain out after printing. If desired, it can be filled afterwards with extra resin.


Small Light Bulb

Small Light Bulb.stl

These files are designed to print in spiralized mode to achieve maximum clarity with translucent filament.

Download includes six models each with unique jack frost patterns.


Jack Frost Cups

Jack Frost Cup 5.stl

Make your bare bulbs beautiful with this color filter. Print in different colors to quickly fit the mood! Designed to be printed with translucent PETG and used with a **_low temperature E27 LED lightbulb only_**.

**_CAUTION:_** Some LED bulbs can still produce significant heat, and while PETG is generally self-extinguishing, it's still flamable, so use discretion to ensure your safety by monitoring your setup until you are confident it won't overheat.

This is a single color version, but you can always swap filaments for horizontal stripes! I also have a [Twisted Version](https://than.gs/m/1224884?affiliateCode=MAKE) available for my paid members!

---

**_Printing Guidelines_**

Two versions of this two part model are included. Labeled 1.6mm and 2.4mm, referring to the thickness of the shell. The 2.4mm version is more robust and will make the color of your filament stronger, while the 1.6mm version will let more light through.

Print solid. No supports required. Remove carefully from buildplate, ensuring you don't bend or snap the thinner parts. You can also stack filters for more nuanced coloration.

---

**_Filaments Used_** *

I just bought a ton of bright transparent PETG filaments from 3DJake using my Thangs Weekly Leaderboard rewards ;D Happy with all of them

- [The Filament ReFill PETG Transparent Red and Transparent Blue](https://tidd.ly/3P1raWe)
- [3DJake PETG Yellow Transparent and Green Transparent](https://tidd.ly/4gjCusG)
- [Fillamentum PETG Iced Green Transparent and Pink Lollipop Transparent](https://tidd.ly/4gDdIUb)
-[Spectrum PETG Premium Transparent Orange](https://tidd.ly/3BxNUde)

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_


Translucent

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cracked Skull

Bullet Hole Vase (Large)

Ice Bubbles

Small Light Bulb