cement brick base_lego 

cement brick base_lego v3.stl

UniManny.stl

It's the UniManny.   

Everyone thinks manatees are sweet and innocent creatures of the sea.  But did you know that 99.9% of all terrorist attacks are done by manatees?  That came as quite a surprise to me too, so I decided to investigate and build a model of a UniManny to better understand these treacherous marine mammals.  Turns out I made up the whole thing. :)

Enjoy the UniManny.  He's always a blast.

Shock for RC Car 80mm

Adjustable shock for RC Car.
Additional parts:
- M3 screw 35mm
- Compression Spring 0.9mm wire (50mm or 60mm length), 12mm OD
- Super glue

You can use Mesh Tools -> Split Model into parts (add-on in Cura) to separate parts and use better positioning.

After print, clean excess filament extrusion from threads before put adjustment ring in shock body.
If it not fit, try printing only adjustment ring at 102% X Y.

I'm using 0.9mm wire springs 50mm length 12mm O.D.
For 1.1mm wire or more, choose 13mm O.D.
Note: 1.4mm (or more) spring wire diameter is too strong for use in RC.

Hope this can be usefull for you too.

Blue Sea dragon articulated

*Limited Time Free Download Free Till Friday* This is a beta version of Blue Sea dragon articulated model, the full version will be uploaded Friday the model works fine but there's still a few improvements I want to make, so there's still plenty of reason to join my membership plans if you haven't already,  Improvements include Stronger joints, more range of motion in the front arms and better bed adhesion for the back feet. This cute articulated model was designed to Look like a Blue glaucus, or better know as a blue sea dragon. These little guys are beautiful but because they eat blue bottles a type of jelly fish, they are poisonous. So if you are lucky enough to see one of the beach or in the water avoid them because they can leave a nasty sting. Surprisingly not a lot is know about these beautiful creatures or how many they're are, because there numbers follow a seasonal change. But this little toy will let you enjoy them all year round. Print settings, Print Speed 25ms Nozzle size 0.4mm, Layer height 0.15mm, Infill 10%, Infill pattern Gyroid, No Supports.

Blue Sea dragon articulated (Free Till Friday)

Printable Chess Board

PCB Base.STL

toiletfidgetbasicreedit.stl

 kitten

a cute baby kitten 3d model for 3d printing

Tippi Tree Test Piece

Here's the test piece for [Tippi Tree](https://than.gs/m/933018). You can use it to make sure your printer settings are well-tuned for printing your Tippi Tree without using too much time or material.


Recommended: PLA 0.4mm nozzle, 0.16mm layer height, 11% infill, 2 shells, 5 top/bottom layers

lego parts for lego (set 30655)

Tippi Fruit Ornament Conversion Stem

Turn your [Tippi Tree](https://than.gs/m/933018) Fruits, Berries, and more into standard ornaments with this alternate stem. Feed a string or wire through the 2mm hole and it's good to go. Also great for making necklaces, earrings, car ornaments, and whatever else you can dream up!

Easy print, no supports required. 2-3 shells, 11% infill, 0.16mm layer height, or whatever suits your use.

Tippi Fruit Ornament Conversion

Fixum Dude Motors PIP Package Delivery Truck 

 Fun little print in place package delivery truck with rotating wheels. 

Introducing the FDM (Fixum Dude Motors) print in place package delivery truck.

Prints without supports. Samples are printed in PLA with 0.2 layer height, at least 3 perimeters, and 10%-15% gyroid infill. Brown and gold example printed in PolyMaker Poly Terra Brown PLA and an unknown gold silk PLA. 

I did color changes at 1.00 mm, 1.40mm, 37.80mm, & 38.20mm (with 0.2 layer heights).

Tippi Tipmas Tree Branch Stacker

A special part that allows you to stack branches on branches on branches! I will use it to build my big Tippi Tipmas Tree to display ornaments from the Tippi Tree Ornament Contest :)

 

For the rest of the parts, check out my original tabletop game Tippi Tree!

ARTICULATED AXOLOTL

Fixum Dude Motors PiP Racecar 

FDM_PrintInPlace_RaceCar_V4.stl

Tumbler fidget toy - Barrel shape v1.stl

This is a fidget toy that needs to be printed with heavier ends so I recommend increasing top and bottom layers to be around 20 layers at .2mm. I also use 20% infill however change as you like to see what works best. It should work anywhere from 20g to about 40g with around 30g optimal

Toys

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

cement brick base_lego

UniManny.stl

Shock for RC Car 80mm

Blue Sea dragon articulated

Printable Chess Board

toiletfidgetbasicreedit.stl

kitten

Tippi Tree Test Piece

View 24 new models

View 16 new models

Fixum Dude Motors PIP Package Delivery Truck

View 78 new models

ARTICULATED AXOLOTL

Fixum Dude Motors PiP Racecar

Tumbler fidget toy - Barrel shape v1.stl

Keycap Fidget Toy

Remix of LEGO Lightsaber inspired Can Coozie - Painted for Prusa MK3S+ MMU3

View 13 new models

View 72 new models

View 18 new models