Egg Tealight Cover -*Diamond Drop*

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Sized to fit a typical LED tealight candle. But can be printed larger or smaller for just décor!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Remix of Simple Heart Box with Lid

DISPLAY ONLY.stl

Tealight Icicle Ornament

Display only do not print.stl

Snowflake Gem Tealight Box

This is a screw top round box that scales very well.

The boxes in the picture are printed at 100%, 60% and 40%.

Prints without supports

Scalable Round Screw-Top Box

Tree Lights (Without Ornaments)

Without ornaments display only do not print.stl

Tree Lights (With Ornaments)

Trees with Ornaments Display only do not print.stl

Tealight Christmas tree

This is a semi-realistic Christmas tree that can be illuminated with an ELECTRIC tealight (no flames please).

The best part is: it can be printed in vase mode, that means no support, no seams, thin walls for illumination, and it prints super fast.

The tree is 75 x 120mm, with a 40mm hole in the bottom. Feel free to scale it up or down to fit your needs.
Print with spiral vase mode.

Suggested settings:
- 5 bottom layers
- 1 top layer
- 0.2mm layer height
- 0.6 line width

TPMS Tree (Fischer Koch S)

TPMS Tree (Fischer Koch S).stl

TPMS Tree (Diamond)

TPMS Tree (Diamond).stl

TPMS Tree (Gyroid)

TPMS Tree (Gyroid).stl

Serac Vase 140mm

This piece is part of a set of four abstract vases inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: https://social.thangs.com/m/491853 
Serac Vase 100mm: https://social.thangs.com/m/491867 
Serac Vase 120mm: https://social.thangs.com/m/491883 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Snap Star

Snap Star Display only do not print.stl

Truss Tree (Kelvin)

Truss Tree Kelvin.stl

Truss Tree (Diamond)

Truss Tree Diamond.stl

Heartstrings Tealight Holder Cylinder

Peer inside the heart-shaped openings in this tealight holder and you’ll see a complex surface structure inspired by the “chordea tendineae,” thread-like bands of fibrous tissue that anchor your heart valves in place. The chordae tendineae are colloquially known as the “heart strings.”

What could be more romantic?

The heart-shaped profiles are formed by slicing precise cross-sections of the mathematic Fischer-Koch C(Y) triply periodic minimal surface.

Again, super romantic, right?

See here for video: https://youtu.be/7ouq1q_qQHU 

Watch the timelapse video closely and you will see layers of hearts hidden inside.

Download other designs in the series:
Square: https://social.thangs.com/m/223467 

Designed with nTopology, timelapse video taken with Mintiontech Beagle Camera.


Heartstrings Tealight Holder Square

Peer inside the heart-shaped openings in this tealight holder and you’ll see a complex surface structure inspired by the “chordea tendineae,” thread-like bands of fibrous tissue that anchor your heart valves in place. The chordae tendineae are colloquially known as the “heart strings.”

What could be more romantic?

The heart-shaped profiles are formed by slicing precise cross-sections of the mathematic Fischer-Koch C(Y) triply periodic minimal surface.

Again, super romantic, right?

See here for video: https://youtu.be/7ouq1q_qQHU 

Watch the timelapse video closely and you will see layers of hearts hidden inside.

Download other designs in the series:
Square:
Cylinder:

Designed with nTopology, timelapse video taken with Mintiontech Beagle Camera.


Hidden Pattern Tealight Holder

Simple tealight holder - pop an electric tealight inside to see the pattern glow through

No need for supports 
Recommend printing with 100% infill if you don't want the infill pattern to show through

Modern Candle Holder with Storage

Semioval Candle Holder With Match Storage.STEP

Carved Stone Candle Holder With Match Storage

Carved Stone Candle Holder With Match Storage.STEP

Truncated Octahedron Tealight Holder

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ


Tealight

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Egg Tealight Cover -Diamond Drop

Remix of Simple Heart Box with Lid

Tealight Icicle Ornament

Snowflake Gem Tealight Box

Tree Lights (Without Ornaments)

Tree Lights (With Ornaments)

Tealight Christmas tree

TPMS Tree (Fischer Koch S)

TPMS Tree (Diamond)

TPMS Tree (Gyroid)

Serac Vase 140mm

Snap Star

Truss Tree (Kelvin)

Truss Tree (Diamond)

Heartstrings Tealight Holder Cylinder

Heartstrings Tealight Holder Square

Hidden Pattern Tealight Holder

Modern Candle Holder with Storage

Carved Stone Candle Holder With Match Storage

View 14 new models