Blank Sign - Do your own design on it!

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared.
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings -
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No



Encourage to play Sign

This sign was requested by a Thangs member!

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared.
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings -
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No

$15.00 display sign

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


$30.00 Display sign

$40.00 Display sign

RTK-Sign40dollar.stl

$50.00 Display sign

Be cautious of your bed placement, I had this over the purge line! (oopsie daisies)

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


Tablet computer

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Blank Sign - Do your own design on it!

Encourage to play Sign

$15.00 display sign

$30.00 Display sign

$40.00 Display sign

$50.00 Display sign

$45.00 Display sign