Fischer Koch S Egg

Fischer Koch S Egg.stl

TPMS Tree (Fischer Koch S)

TPMS Tree (Fischer Koch S).stl

Fischer Koch S Tealight Holder

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ


Fischer Koch C(Y) Egg

Fischer-Koch C(Y) Egg.stl

Gyroid Tealight Holder

Reticular Form 2

This piece is part of a series of curious-looking vases inspired by the forms of “reticular” structures in the brain and elsewhere. 

See here for video: https://youtu.be/1x4cdOGU4r0 

“Reticular” forms are characterized by a fine network or netlike structure. The most common anatomical example is the reticular formation in the brain, one of the oldest parts of the brain that plays a crucial role in consciousness.

When designing these pieces, I imagined what it would be like to inhabit and move around inside of these shapes. 

To add a dash of function, the forms have a hole at the top that can be used to hold your favourite organic plant material. The 26mm diameter hole will also hold a 1” test tube or similar container for water.


Reticular Form 1

Schwarz P Egg

This egg design is part of a series of “10 Decorative Minimal Surface Eggs”. The series was originally created in 2021.
See my page for a more recent similar series of hollow “10 Easter Eggshells” that can be used to store objects or candy.
The descriptions below offer specific suggestions for printing. One general word of caution is when using “tree” supports, be sure to add “support blocks” to prevent the tree structures from extending up into the interior of the egg. They’ll be impossible to remove.
Expect to do a bit of post-print cleaning with each piece.
Schwarz' P Egg
This relatively simple egg requires a small amount of tree support to the bottom bulge. This is a good one to start with.
Schwarz’ D Egg
The Schwarz D Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schoen’s Gyroid Egg
The Schoen’s Gyroid Egg requires tree supports for the bottom third or so.
Schoen's Batwing Egg
The Schoen's Batwing Egg is tricky in that it has some rather large horizontal surfaces. The model shown was printed with an extensive amount of tree support. While the overall structure held up, the undersides of the horizontal surface required a lot of cleanup.
Fischer-Koch S Egg
The Fischer-Koch S Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schwarz’ CLP Egg
This relatively simple egg requires a small amount of tree support to the bottom bulge. This is a good one to start with.
Schoen’s I-WP Egg
Schoen’s I-WP Egg requires tree supports for the bottom third or so.
Schoen’s F-RD Egg
Schoen’s F-RD Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schoen’s F-RD(r) Egg
Schoen’s F-RD(r) Egg requires tree supports for the bottom third or so.
Fischer-Koch C(Y) Egg
Fischer-Koch C(Y) Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.


Decorative Minimal Surface Lightbulbs

Light Bulb Schwarz P.stl

Surface Slab (Fischer-Koch S)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S:
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


Surface Slab (SplitP)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S: https://than.gs/m/868235 
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


Heartstrings Tealight Holder Square

Peer inside the heart-shaped openings in this tealight holder and you’ll see a complex surface structure inspired by the “chordea tendineae,” thread-like bands of fibrous tissue that anchor your heart valves in place. The chordae tendineae are colloquially known as the “heart strings.”

What could be more romantic?

The heart-shaped profiles are formed by slicing precise cross-sections of the mathematic Fischer-Koch C(Y) triply periodic minimal surface.

Again, super romantic, right?

See here for video: https://youtu.be/7ouq1q_qQHU 

Watch the timelapse video closely and you will see layers of hearts hidden inside.

Download other designs in the series:
Square:
Cylinder:

Designed with nTopology, timelapse video taken with Mintiontech Beagle Camera.


TPMS Party Pack

TMPS Party Pack Display.stl

Heartstrings Tealight Holder Cylinder

Peer inside the heart-shaped openings in this tealight holder and you’ll see a complex surface structure inspired by the “chordea tendineae,” thread-like bands of fibrous tissue that anchor your heart valves in place. The chordae tendineae are colloquially known as the “heart strings.”

What could be more romantic?

The heart-shaped profiles are formed by slicing precise cross-sections of the mathematic Fischer-Koch C(Y) triply periodic minimal surface.

Again, super romantic, right?

See here for video: https://youtu.be/7ouq1q_qQHU 

Watch the timelapse video closely and you will see layers of hearts hidden inside.

Download other designs in the series:
Square: https://social.thangs.com/m/223467 

Designed with nTopology, timelapse video taken with Mintiontech Beagle Camera.


TPMS

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Fischer Koch S Egg

TPMS Tree (Fischer Koch S)

Fischer Koch S Tealight Holder

Fischer Koch C(Y) Egg

Gyroid Tealight Holder

Reticular Form 2

Reticular Form 1

Schwarz P Egg

Decorative Minimal Surface Lightbulbs

Surface Slab (Fischer-Koch S)

Surface Slab (SplitP)

Heartstrings Tealight Holder Square

TPMS Party Pack

Heartstrings Tealight Holder Cylinder

Schoens F-RD(r) Egg

Octet Tealight Holder

Schwarz D Tealight Holder

Gyroad Sculpture

Schoens I-WP Egg

Schoens Batwing Egg