Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Loose Tolerance Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Doggo - beagle

Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Medium Tolerance Snappy Cat:**
Coming Soon
**Loose Tolerance Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

FDM_PrintInPlace_Firetruck_V1.stl

Fixum Dude Motors PiP Fire Engine 

Description

Introducing the FDM (Fixum Dude Motors) print in place fire engine. The wheels rotate right off the build plate so you can respond to any emergency right away.

- Prints on its side without supports. Sample printed in:
Hatchbox Red PLA on the Bambu X1 Carbon in .20LH, with 4 top/bottom layers, 3 perimeters and 10% gyroid infill (at least 3 perimeters recommended when used as a child's toy)

Articulated Ghosty with Loop || Halloween

Articulated Ghosty with Loop V1.24.stl

Articulated Ghosty || Halloween

Articulated Ghosty V1.24.stl

 kitten

a cute baby kitten 3d model for 3d printing

chubby bee brother 2

Tippi Tree Test Piece

Here's the test piece for [Tippi Tree](https://than.gs/m/933018). You can use it to make sure your printer settings are well-tuned for printing your Tippi Tree without using too much time or material.


Recommended: PLA 0.4mm nozzle, 0.16mm layer height, 11% infill, 2 shells, 5 top/bottom layers

FHW: Oxchan/ Zorblin Gerb in pumpkin costume

Hello Tribe,
I was  feeling down today so I am made a Gerb in a Jack-o-lantern to get some laughs and cheer everyone else up, Its a great seasonal model but a great addition to any Oxchan/ Zorblin army.
Please enjoy

Cheers
Maker Millwright

FHW: Oxchan Gerb in pumpkin

JDM Brand Logo Keychain

Toyota Logo Old Keyring.stl

Tippi Fruit Ornament Conversion Stem

Turn your [Tippi Tree](https://than.gs/m/933018) Fruits, Berries, and more into standard ornaments with this alternate stem. Feed a string or wire through the 2mm hole and it's good to go. Also great for making necklaces, earrings, car ornaments, and whatever else you can dream up!

Easy print, no supports required. 2-3 shells, 11% infill, 0.16mm layer height, or whatever suits your use.

TOY

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Doggo - beagle

Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

View 12 new models

Articulated Ghosty with Loop || Halloween

Articulated Ghosty || Halloween

kitten

chubby bee brother 2

Tippi Tree Test Piece

FHW: Oxchan/ Zorblin Gerb in pumpkin costume

View 87 new models

View 16 new models

SHARK ARTICULATED

chubby bee brother 1

PrintABlok Tighter Connector

dragon baby 3

dragon baby 1

dragon baby 2