Gift Box #11 Print-In-Place

GIFT BOX 11-ASSY_REF ONLY.stl

Xbox Series X Cloud Dock - Print-in-Place

Xbox_Clouds-Part_A_Holoprops.stl

Collapsing Dice Tower

This dice tower prints-in-place in the retracted position with no supports but after printing it extends to three times its original height. The drawbridge opens to allow the dice through, but a detent keeps it closed when traveling.  The funnel on top and the angle on the bottom mixes the die and makes sure they exit the tower every roll. There is a button on the bottom that locks the tower in position so it wont accidently extended. There is compartment on the bottom for storing dies with a built in catch on the lid.

It is designed to be printed with a .4mm nozzle. The walls are four shells thick, two shells are used for the brick inlay.

Note: if your tower does not extend all the way, pull it apart until you have the desired extension and leave it for a day or two. The plastic will eventually "creep" and you'll get the perfect fit.
Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)

Sliding Dovetail Lock Box with Key

Sliding Dovetail Lid Box by Product Design Online. (Base file for remixing)

Sliding Dovetail Lid Box.stl

ClampDock Accessory - Mug Holder

ClampDock 1v00a mug holder 100mmID.stl

Citrus clock

Citrus_clock.3mf

GEN2 Table Top Kit - Medium (LEGACY)

Foot Rail Combiner R + L - Medium.stl

Modular Mushroom Lamp

Mushroom Lamp Display.stl

Mushroom lamp “Morchella Esculenta”

Head_big.stl

GEN2 Table Top Kit V2 - 165

Cover - Lower - Double - MINI.stl

Gridfinity Multi-tool Blade Caddy

GEN2 Drawers - Large

GEN2-QL Case - Single - Large.stl

Starburst Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

TABLE

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gift Box #11 Print-In-Place

Xbox Series X Cloud Dock - Print-in-Place

Collapsing Dice Tower

Sliding Dovetail Lock Box with Key

ClampDock Accessory - Mug Holder

Citrus clock

GEN2 Table Top Kit - Medium (LEGACY)

Modular Mushroom Lamp

Mushroom lamp “Morchella Esculenta”

GEN2 Table Top Kit V2 - 165

Gridfinity Multi-tool Blade Caddy

GEN2 Drawers - Large

Starburst Christmas Ornament

ClampDock Accessory - Multi-Remote Holder

GEN2 Table Top Kit - STANDARD (LEGACY)

Simple Stackable Tea Bag Dispenser

Post Cap

ClampDock Accessory - Design Blank

GEN2 185 Decor Drawers - All

Lamp “Bonbon”