Plaque standoffs

Plaque standoffs
I attach these to the back of a plaque I print. This gives a little space between the wall and the plaque, as well as giving a place to attach a wire or string for hanging. I use Gloop to affix them. 4 gives the plaque stability but 3 would work too depending on the size of the plaque.
2 are 2mm shorter, these are for the top. Adjust if needed.
Picture only shows 1 size.


HMG7.4 MGN12-H Tall Linear Rail Top X Carriage V3.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

HMG7.3 Anet A8 Plastic X Carriage.stl

HMG7.4 Artillery Sidewinder X2 Gantry Adapter.stl

HMG7 Ender 3 V2 Gantry Adapter V3.stl

HMG7.2 Anycubic i3 Mega S X Carriage.stl

HMG7.2 Anycubic Kobra Go Gantry Adapter.stl

HMG7.3 BIQU B1 Gantry Backplate.stl

HMG7.3 Ender 3 Neo Gantry Adapter.stl

HMG7 Ender 3 V2 Neo Gantry Adapter V3.stl

HMG7.2 Kingroon KP3S Gantry Adapter.stl

HMG7.2 Tronxy X5SA Pro Gantry Adapter V2.stl

HMG7 Anycubic Vyper Gantry Adapter V2.stl

HMG7 Ender 5 V Wheel X Carriage V2.stl

HMG7 Ender 3-Pro Gantry Adapter.stl

HMG7.3 Ender 3 Max Neo Gantry Adapter.stl

HMG7 Ender 3 V2 Neo Gantry Clip.stl

HMG7 Ender 5-5 Pro-5 Plus Gantry Adapter V3.stl

HMG7.3 Ender 3 V Wheel X Carriage V2.stl

HMG7.3 Ender 3 Series Gantry Clip V2.stl

Standoffs

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Plaque standoffs

HMG7.4 MGN12-H Tall Linear Rail Top X Carriage V3.stl

HMG7.3 Anet A8 Plastic X Carriage.stl

HMG7.4 Artillery Sidewinder X2 Gantry Adapter.stl

HMG7 Ender 3 V2 Gantry Adapter V3.stl

HMG7.2 Anycubic i3 Mega S X Carriage.stl

HMG7.2 Anycubic Kobra Go Gantry Adapter.stl

HMG7.3 BIQU B1 Gantry Backplate.stl

HMG7.3 Ender 3 Neo Gantry Adapter.stl

HMG7 Ender 3 V2 Neo Gantry Adapter V3.stl

HMG7.2 Kingroon KP3S Gantry Adapter.stl

HMG7.2 Tronxy X5SA Pro Gantry Adapter V2.stl

HMG7 Anycubic Vyper Gantry Adapter V2.stl

HMG7 Ender 5 V Wheel X Carriage V2.stl

HMG7 Ender 3-Pro Gantry Adapter.stl

HMG7.3 Ender 3 Max Neo Gantry Adapter.stl

HMG7 Ender 3 V2 Neo Gantry Clip.stl

HMG7 Ender 5-5 Pro-5 Plus Gantry Adapter V3.stl

HMG7.3 Ender 3 V Wheel X Carriage V2.stl

HMG7.3 Ender 3 Series Gantry Clip V2.stl