Bigger Cute Planter -  Jim

Hey,
this is Tim.Tim will take good care of your plants.

Print upside down with supports.

Cute Planter Tim

Spin Vase No.1

A clean and elegant vase. Print using Spiralize/Vase Mode. It's a tall model, but don't worry, you can scale it however you want! Print with a few bottom layers and no top layers.

Spirograph Inspired Torus

This hypnotizing geometric design features intricate patterns that are captivating and aesthetically pleasing to look at. The model perfectly replicates the symmetrical, looping pathways characteristic of the mathematical curve drawings called Spirographs. The detailing is exquisite, providing you a perfect pattern that is proportionally accurate. Perfect for mathematical demonstrations, scientific applications or just as a decorative item, this Spirograph can be 3D printed and used in various ways. 
The model is created for printing with resin printers.

Spirograph inspired torus

Twisted Facets Vase

Prints fine in vase mode if you want a quick print but for best results recommend printing with the following settings:
- 2-3 perimeters 
- 2-3 bottom layers 
- 0% infill
- 0 top layers

Honeycomb vase (Vase No. 12)

These files are for Personal Use Only. If you would like a Commercial License to sell prints made from these designs, please join me on Patreon: https://www.patreon.com/kazitoad

This vase model has a concave bubble texture. 

It is specifically designed to be printed in spiral vase mode, printing with one continuous outer wall, to print quickly, without a seam or support.

I suggest using a large nozzle, line width, and layer height. I also suggest printing in spiral vase mode with 6 bottom layers and only 1 outer wall.

Checkout my other models :)

Hex Bubble vase (Vase No. 11)

These files are for Personal Use Only. If you would like a Commercial License to sell prints made from these designs, please join me on Patreon: https://www.patreon.com/kazitoad

This vase model sports a scaled hexagonal bubble pattern.

It is specifically designed to be printed in spiral vase mode, printing with one continuous outer wall, to print quickly, without a seam or support.

I suggest using a large nozzle, line width, and layer height. I also suggest printing in spiral vase mode with 6 bottom layers and only 1 outer wall.

If you like this, take a look at my other models :)

Hex_Bubble_vase_VaseNo11_KaziToad.stl

Hextraction - Spiral Tiral

Spiral tile.step

Spiral Vase (aka: Sneaky Holder)

Main Vase.obj

Deca-vase

A 10 sided spiral vase that tapers thinner towards the top.

This has been designed to print with 0.8mm walls but you could scale it to your desired size.

Faceted Bowl

Simple faceted bowl
To be printed in vase/spiralise mode

Faceted Tumbler

Designed to be printed in vase/spiralise mode, this is a straightforward print with no need for supports.

Spiral Vase

A Spiral Vase I've quickly loftet [https://i.imgur.com/VPuoNjV.gif](url)

Robert Planter (Large)

Stairways to heaven? Or just a thing to put your plants in? I’ll let you decide. 

See here for video: https://youtu.be/noY4YzvdlMc 

Two sizes available:
Small: https://than.gs/m/808425 
Large:


Heartbeat Vases (For Spiralized Printing)

Heartbeat Spiralize Vase 90mm.stl

Tealight Icicle Ornament

Display only do not print.stl

Ripple Trees

Ripple Trees Display only do not print.stl

Abstract Vase (Vase No. 10)

This is an abstract patterned vase.

It is specifically designed to be printed in spiral vase mode, printing with one continuous outer wall, to print quickly, without a seam and no support.

This one has some shallow walls so it might not be watertight halfway up (depending on your print settings).

I suggest using a large nozzle, line width, and layer height. I also suggest printing in spiral vase mode with 4 bottom layers and only 1 outer wall.

If you like this, take a look at my other models :)

Dragon Vase - med (Vase No. 9) 

This is a cool dragon patterned vase.

It is specifically designed to be printed in spiral vase mode, printing with one continuous outer wall, to print quickly, without a seam and no support.

This one has some overhangs so it probably will not be watertight (depending on your print settings).

I suggest using a large nozzle, line width, and layer height. I also suggest printing in spiral vase mode with 4 bottom layers and only 1 outer wall.

If you like this, take a look at my other models :)

Dragon Vase - short (Vase No.8)

This one has an organic "dragon scale" pattern. 

It is specifically designed to be printed in spiral vase mode, printing with one continuous outer wall, to print quickly, without a seam and no support.

This one has some overhangs so it probably will not be watertight (depending on your print settings). 

I suggest using a large nozzle, line width, and layer height. I also suggest printing in spiral vase mode with 4 bottom layers and only 1 outer wall.

If you like this, take a look at my other models :)

Twisted cross Vase (Vase No. 7)

Here is vase number 7, it is a unique twisting and crossing pattern. 

It is specifically designed to be printed in spiral vase mode, printing with one continuous outer wall, to print quickly, without a seam and no support.

I suggest using a large nozzle, line width, and layer height. I also suggest printing in spiral vase mode with 4 bottom layers and only 1 outer wall.

If you like this, take a look at my other models :)

Spiral

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bigger Cute Planter - Jim

View 72 new models

Spirograph Inspired Torus

Twisted Facets Vase

Honeycomb vase (Vase No. 12)

Hex Bubble vase (Vase No. 11)

View 11 new models

View 15 new models

Deca-vase

Faceted Bowl

Faceted Tumbler

Spiral Vase

Robert Planter (Large)

View 10 new models

Tealight Icicle Ornament

Ripple Trees

Abstract Vase (Vase No. 10)

Dragon Vase - med (Vase No. 9)

Dragon Vase - short (Vase No.8)

Twisted cross Vase (Vase No. 7)