Christmas Tree Stackable Cookie Box

TreeBox_BOTTOM_EniNiDesign.stl

Easter bunny decor

Easter bunny obje ct.stl

Penguin Singing Book 7 of 12 Ornament

Penguin_Ornament_07of12_SparkyFace5.stl

Cute Trick or Treat Ghost - Halloween Decor

Ghost-Body_Holoprops.stl

Light up Tree Christmas Decoration

Tree.STL

Pumpkin-Shaped Stash Jar

PUMPKIN JAR [BOTTOM].stl

Halloween Candy Skull

HCS-R02.STL

Happy Halloween Wall Decor Sign

Happy Halloween.stl

12 Dragon Eggs of Christmas Advent Eggs

12eggs-blank.stl

Easter Egg (1)

Easter Egg (1)_Top.stl

Winged Kaleidoscope Christmas Ball

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 6.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height or even adding infill. Infill is counter-intuitive, but it means the hot end moves to a different part of the layer, giving the outside a chance to cool. 

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm
* Alternate Extra Layer: Yes

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
I would recommend adding 100% infill to the loop at the top of the ornament to make the loop stronger, but I wouldn't add infill anywhere else. It just adds weight.

To add infill (or extra walls, tops or bottoms) to just one area of an object in Cura:
1. Add a support blocker
2. Select the support blocker and scale and position it where you want the added infill
3. Select “Per Model Settings” then select “Modify Settings for Overlaps”
4. Select “Select Settings” and check “Infill Density” then select “Close”
5. Enter the amount of infill you want

*Speed*
* Outer Wall: 20 mm/sec
* Inner Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for bed adhesion.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

I also added a custom cylindrical support to either side where the bottom ledges intersect. This not only helps with printing the point of intersection, it help prevent the model from wobbling or coming loose from the print plate.

Chick dragon mini.3mf

Chick dragon mini.stl

Easter BunnyEgg Decor 

easter egg_bunny decoration.stl

Happy Easter Text Decor 

Happy Easter egg decoration.stl_B_A(1).stl

Halloween Candy Bowl

Halloween Candy Bowl by Mesh Mayhem.3mf

Santa Hat Ornament

Santa flying over Christmas Tree

Front panel.stl

Ask Santa for a 3D dragon!!

This display stand is perfect for upcoming craft fairs!  
I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


Special Occasions

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Christmas Tree Stackable Cookie Box

Easter bunny decor

Penguin Singing Book 7 of 12 Ornament

Cute Trick or Treat Ghost - Halloween Decor

Light up Tree Christmas Decoration

Pumpkin-Shaped Stash Jar

Halloween Candy Skull

Happy Halloween Wall Decor Sign

12 Dragon Eggs of Christmas Advent Eggs

Easter Egg (1)

Winged Kaleidoscope Christmas Ball

Chick dragon mini.3mf

Easter BunnyEgg Decor

Happy Easter Text Decor

Halloween Candy Bowl

Santa Hat Ornament

Santa flying over Christmas Tree

Ask Santa for a 3D dragon!!

Halloween Sign_SUNLU

2D Bat Halloween Decorations