Cross Bones Keychain .3mf

Cross Bones Keychain.stl

Dragon Head - Bust 

Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Medium Tolerance Long Bony Basilisk:**
https://than.gs/m/937050

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Loose Tolerance Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Haunted House Coaster

Haunted House Coaster.3mf

Jack-o-lantern Coaster

Jack o Lantern Coaster.3mf

Skull Coaster

Skull Coaster.3mf

Spider Web Coaster

Spider Web Coaster.3mf

Skull Keyring 1

A keyring based on an Icon by James Smith.
Small simple Halloween keyring model.

Icon from -  Skull by James Smith from <a href="https://thenounproject.com/browse/icons/term/skull/" target="_blank" title="Skull Icons">Noun Project</a> (CC BY 3.0)

[https://thenounproject.com/browse/icons/term/skull/](https://thenounproject.com/browse/icons/term/skull/)

Skull Candy Bowl

Poison Pumpkin (+Bambu 3mf Files)

PoisonPumpkin.stl

skull keychain 3

Skull key chain for multi color print
Join my membership plan and get commercial to sell the prints of all my designs.

skull.stl

As anatomically correct as I could while still keeping it simple for Halloween design. 

FRIGHTENING FRIENDS - Jack O Lantern #1 TOPPER, TOY 

Jack O Lantern #1 for your Straw or Toy needs. 

Pumpkin Skull - Low Poly

Pumpkin Skull_Full_Low Poly.stl

Treat Keyrings

Skull Bat Keyring.stl

Skull Coffin Box ⚰️

Plate 3.stl

Bat Skull - Low Poly

The Bat Skull in its minimalist low poly version is a mesmerizing fusion of darkness and geometry.

Sharp angles and haunting shadows bring an air of intrigue, while the simplicity of the design draws you in.

His spooky essence will add a touch of spine-chilling charm to your space.

It's the perfect blend of spooky and stylish, ready to cast its spell on anyone who gazes upon it! 🦇💀
⸻⸻⸻⸻⸻⸻⸻⸻

**_Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @randomizy.3d, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #randomizy when sharing your video)_**

⸻⸻⸻⸻⸻⸻⸻⸻

𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please do consider joining my Membership here:_** https://than.gs/u/296962?plans=true

⸻⸻⸻⸻⸻⸻⸻⸻
**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/Randomizy

Bat Skull_Low Poly.stl

Skull Stand - Playstation 5 Disc Edition - Print-in-Place

PS5_Skull-Left.stl

CoD_MWII_Ghost_Mask

Remixed a model from [Serhero ](https://www.thingiverse.com/serhero/designs) on thingiverse. 
Smoothed edges, reworked reliefs, add some extra bulk around the eyes for support when actually wearing it.
Ask if you have any specific questions on parameters or design changes!

Printed it vertically on a Longer LK5 Pro
Specs:
- PEI steel bed at 65C, nozzle 207C
Initial layer 65/210C respectively.
- Layer Height 0.15
- 10% infill / Gyroid
- Speed 60 / infill 65 / outer wall 35 / inner wall 40
- Travel speed 180
- Tree supports everywhere
- 8mm Brim (needed for supports to stick)

- Wall Line Count = 3
- Outside to Inside walls
- Z Seam Align = Sharpest Corner/Smart Hiding
- 5 top/bottom layers/Lines/0.75 thickness
- 

Skull

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 16 new models

Dragon Head - Bust

Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

Haunted House Coaster

Jack-o-lantern Coaster

Skull Coaster

Spider Web Coaster

Skull Keyring 1

View 20 new models

Poison Pumpkin (+Bambu 3mf Files)

View 13 new models

skull.stl

View 27 new models

Pumpkin Skull - Low Poly

Treat Keyrings

Skull Coffin Box ⚰️

Bat Skull - Low Poly

View 46 new models

CoD_MWII_Ghost_Mask