Biker Skull Ring (Pre-Supported)

bikerskull ring.stl

Jack Skellington

Jack Skellington.stl

celtic skull wall art

upper celtic skull.stl

Half Skull Mask.stl

Mushroom Skull Jar

Mushroom Skull Jar.3mf

Cyber Skull Helmet - Wearable 

Cyber Skull Helm - face.stl

Halloween Magnets

Cauldron(Magnet).stl

Skull_scar

Here is the Skull that I made in Sculptris for Halloween.
I printed mine in Fillamentum Light Ivory, but i'm looking forward to trying it in some more unconventional colour choices,
The bottom of the model has a shaped underside to allow it to be used in more situations, Though I was planning to sit mine on a table so I sank the model into the print bed to make it more stable (it also meant less supports were required).

I hope you enjoy and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍
https://www.buymeacoffee.com/bugman140

Hueforge  - women skull.stl

Hueforge - Women skull

To print it, 2 colors were used, in order:
- PLA Black from Arianeplast
- PLA White from Ariane plast

**Print settings** : 

- Height of the first layer: 0.16mm
- Height of other layers: 0.08mm
- 100% filling

- Black until layer #19 at 1.6mm
- White for the rest.

We obviously have a HUEFORGE license.

All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

[Instagram](https://www.instagram.com/arthena_3d/)

[Facebook](https://www.facebook.com/Arthena3D/)

[Tiktok](https://www.tiktok.com/@arthena.3d)

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)

Stylized Stone Reaper Mask -"Grim Reaper" (Sculptober Day 21)

StylizedStone-GrimReaper.stl

Dia de Los Muertos Skull

Jack Skellington Band Poster

A quirky little Halloween print of Jack Skellington as if he's in a pop-punk band. You can replace the green with any colour you think fits, and the Teal with any light colour (grey, beige etc). Have fun! 

 

As with other Hueforge models, an AMS or an MMU is not necessary. All you have to do is set pauses where the filament swaps are being done, and then load the new filament in before resuming the print. 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8

 
**Swap Instructions:**
- Start with Black
- At layer #10 (0.96mm) swap to BambuLab Green
- At layer #17 (1.52mm) swap to Teal
- At layer #23 (2mm) swap to White for the rest.

bandskellington_Front_160x213.3mf

Pumpkin Skull 2.0

Pumpkin Skull 2.0_Full.stl

Pumpkin Skull 2.0 (Hollowed)

Pumpkin Skull 2.0 (Hollowed)_Full.stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Skele-Spine_v2_Tight.stl

Lattice Skull Wire Tangle

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave: https://than.gs/m/948893 
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Skull Wire Weave

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


The Maiden of Death

the maiden of death.stl

Lattice Skull Diamond

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Lattice Skull Square

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square:
Diamond:
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


Skull

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 212 new models

Jack Skellington

View 41 new models

View 28 new models

Mushroom Skull Jar

View 35 new models

View 45 new models

Skull_scar

View 12 new models

Stylized Stone Reaper Mask -"Grim Reaper" (Sculptober Day 21)

View 716 new models

Jack Skellington Band Poster

Pumpkin Skull 2.0

Pumpkin Skull 2.0 (Hollowed)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Lattice Skull Wire Tangle

Lattice Skull Wire Weave

The Maiden of Death

Lattice Skull Diamond

Lattice Skull Square