**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Flustra (Fluss-truh) Pendant Light brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the ripples underneath evoke a more dynamic sense of motion.


**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**



**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

The Flustra - Vase Mode Pendant Light (Large)_Bambu by Mimetics3D.3mf

**"This beautifully crafted piece showcases a detailed octopus tentacle curling from a porthole, bringing the mystique of the ocean into your home. Both a striking decoration and functional wine holder, it perfectly blends elegance and utility."**

[➡️Video by the talented _coco3d_](https://www.instagram.com/reel/DA2SxI1N2aG/)

➡️[As seen on the 3D Printing Nerd!](https://youtu.be/nZjmKJmkRco?si=oQqghf94uqOatbu_)

This awesome design print with no supports at all! And it can be printed in 2 colors on any printer. Just add a pause after printing the porthole window, swap filaments and keep printing. 

"For the tentacle I used Esun dual color Green-Blue Silk Pla."

**"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."**

_3D PRINTING SETTINGS:_

-No supports needed!

-Factory files included for Bambu and Orca Slicers. For other slicers you can add a pause at 18.90mm and change colors manually.

-12% Rectilinear infill for the base, 7% rectilinear infill or more for the tentacle, 2-3 walls, 0.16mm layer height.


Sea Creature

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

Octopus Tentacle Wine Bottle Holder / No Supports