This is a cam driven kinetic sculpture that reveals a message through an intricate mechanical motion. The curved segments are carefully positioned using the specifically design geometry of the cams.  With 3 different symbols based on 3 different cam and follower positions, a beautiful message is revealed.

Made almost fully using 3D printed parts, along with some bearings and screws, this whole sculpture can be assembled in just minutes and can bring a serious wow factor to any birthday, valentines day, anniversary, or any other occasion where it's appropriate to share the simple phrase 'Eye Love U'

The video below that shows how easily this mechanism can be assembled!

**The STL File:**

Prints on all standard 3d printers without supports, requires the following additional parts to assemble:
- 12 M4x12 Screw (I used https://amzn.to/3Cf7dpp)
- 12 M4 Washers (These are the ones https://amzn.to/3Sh129Z)
- 12 624Z 13mm OD/4mm ID Bearings (These work great https://amzn.to/40Ps10M)

Recommended print settings:

Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18% 
Total Filament Required: ~600g

Minimum Build Plate Required: 205x205mm

**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!

Eye Heart You Cam Driven Sculpture

Build 1 - 21h - 300g (Base Components).stl

"Sometimes, love strikes when you least expect it... and it strikes hard."

Celebrate the season of passion with this special 3D printable sculpture. This piece captures the literal moment of being "struck by Cupid" — a beautiful, dynamic figure caught in the overwhelming rush of falling in love.

• Optimized for Resin (SLA): Highly recommended for capturing the fine details of the hair, the arrow, and the silhouette.

Don’t fall on the floor, Fall in Love — Valentine's Special

Luv_SubTool1.stl

Colt (Original) - Brawl Stars

Colt -.stl

Genio (Original) - Brawl Stars

Genio -.stl

Draco (Only) - Brawl Stars

Draco (Only)-.stl

Draco (Original) - Brawl Stars

Draco -.stl

Lumi (Original) - Brawl Stars

Lumi -.stl

Cordelius (Original) - Brawl Stars

Cordelius -.stl

Amber (Original) - Brawl Stars

Amber -.stl

Gus (Original) - Brawl Stars

Gus -.stl

Grom (Original) - Brawl Stars

Grom -.stl

Gray (Original) - Brawl Stars

Gray -.stl

Print of STG-01 Exor from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head.

Exor

Exor_Beige.3mf

Print of MSM-04 Acguy from Mobile Suit Gundam Thunderbolt in roughly 1/144 scale. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The holes in the knee and elbow joints and the "slots" for the hands should be reamed with a 4mm drill bit to ensure proper fit for the pins that are inserted through them during assembly.

Acguy Thunderbolt Version

Acguy_TB-Torso_Mid_Strip_Beige.stl

Print of KWG-03 Mach Massive from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. Horns will need to be printed 2 times, and Hammer Pins 3 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Mach Massive

Mach_Massive-Head_White.stl

Print of KWG-02 Solin from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. A few parts will need to be printed several times for the assembly including the Arm Rivets will need to be printed 12 times, Horn rivets and Arm Claw parts will need to be printed 4 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Solin

Solin-Head_Main_White.stl

**"This beautifully crafted piece showcases a detailed octopus tentacle curling from a porthole, bringing the mystique of the ocean into your home. Both a striking decoration and functional wine holder, it perfectly blends elegance and utility."**

[➡️Video by the talented _coco3d_](https://www.instagram.com/reel/DA2SxI1N2aG/)

➡️[As seen on the 3D Printing Nerd!](https://youtu.be/nZjmKJmkRco?si=oQqghf94uqOatbu_)

This awesome design print with no supports at all! And it can be printed in 2 colors on any printer. Just add a pause after printing the porthole window, swap filaments and keep printing. 

"For the tentacle I used Esun dual color Green-Blue Silk Pla."

**"All of my models are for personal use only, unless you are an active subscriber of Thangs with a commercial license."**

_3D PRINTING SETTINGS:_

-No supports needed!

-Factory files included for Bambu and Orca Slicers. For other slicers you can add a pause at 18.90mm and change colors manually.

-12% Rectilinear infill for the base, 7% rectilinear infill or more for the tentacle, 2-3 walls, 0.16mm layer height.


Octopus Tentacle Wine Bottle Holder / No Supports

Tentacle Wine Holder FF 2 Colors AMS FF.3mf

Tentacle Wine Holder STL.stl

Discover the ultimate blend of functionality and artistic flair with our Retro-Inspired Stackable Storage Pods. Whether you view them as chic sculptures or essential organizers, these pods are designed to maximize your space without compromising on style. Inspired by the natural forms of cacti, each pod features a seamless stacking capability, allowing you to build and customize your storage solution vertically, saving precious counter or desk space.

Choose from three uniquely shaped bases—boomerang, flower, or disc—to create a personalized arrangement that suits your decor and organizational needs. The distinct shapes not only add a touch of retro charm but also provide a stable foundation for your stackable ensemble. Perfect for small knick-knacks, office supplies, or even as a decorative element in any room, these Storage Pods merge practicality with the whimsy of design. Elevate your organizing game with a system that's as visually intriguing as it is functional.

**Print Settings**
- No brim needed.
- No supports are needed.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.08mm to 0.12 with variable layer height

**Assembly**: https://youtu.be/Anb2tB9c0Ew



Retro-Inspired Stackable Storage Pods: Organic Sculptural Shapes, Space-Saving Multi-Use Organizer

pixelandpapier__storage_pod__pod.stl

Honoring the wonderful Zombiehedgehog. Immerse yourself in a world of creativity with the Zombie Hedgehog 3D model from Thangs.com. Perfect for art enthusiasts and collectors, this uniquely crafted art piece combines the cute charm of a hedgehog with a touch of eerie fantasy, creating a masterpiece of 3D sculpture that ensnares imagination and sparks fascination. Infused with remarkable details that promise captivating realism. To truly appreciate this sculpture's intricate design and texture, view the vivid images available on the site. This 3D model is a testament to the boundless potential of digital artistry. 

Supports & Photography by Charro Zuck

Zombie_Hedgehog (Pre Supported)

Zombie_Hedgehog.stl

The most complete set for creating your own Antique Greek City!

The Antique Greek City Set includes:
3D Printable Terrain Models
PDF Maps 90x60cm (grid & gridless)
City History PDF
Display piece Painting Guide

*Latest update: March 20th, 2024.



Models and Updates List:
https://docs.google.com/spreadsheets/d/1ZS7vfIPyWocWjLr95uwf4TILpUMePbS3BhQgEN2xDQc/edit?usp=sharing

Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Antique Greek City (Pre-Supported)

AG_Bridge_Complete.stl

Sculpture

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Eye Heart You Cam Driven Sculpture

Don’t fall on the floor, Fall in Love — Valentine's Special

Colt (Original) - Brawl Stars

Genio (Original) - Brawl Stars

Draco (Only) - Brawl Stars

Draco (Original) - Brawl Stars

Lumi (Original) - Brawl Stars

Cordelius (Original) - Brawl Stars

Amber (Original) - Brawl Stars

Gus (Original) - Brawl Stars

Grom (Original) - Brawl Stars

Gray (Original) - Brawl Stars

Exor

Acguy Thunderbolt Version

Mach Massive

Solin

Octopus Tentacle Wine Bottle Holder / No Supports

Retro-Inspired Stackable Storage Pods: Organic Sculptural Shapes, Space-Saving Multi-Use Organizer

Zombie_Hedgehog (Pre Supported)

Antique Greek City (Pre-Supported)