R7 Gyro Flower Fidget | Spring Gyro Fidget Toy | R7Makers

R7MakersSpringFidget.3mf

Schoens Batwing Egg

This egg design is part of a series of “10 Decorative Minimal Surface Eggs”. The series was originally created in 2021.
See my page for a more recent similar series of hollow “10 Easter Eggshells” that can be used to store objects or candy.
The descriptions below offer specific suggestions for printing. One general word of caution is when using “tree” supports, be sure to add “support blocks” to prevent the tree structures from extending up into the interior of the egg. They’ll be impossible to remove.
Expect to do a bit of post-print cleaning with each piece.
Schwarz' P Egg
This relatively simple egg requires a small amount of tree support to the bottom bulge. This is a good one to start with.
Schwarz’ D Egg
The Schwarz D Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schoen’s Gyroid Egg
The Schoen’s Gyroid Egg requires tree supports for the bottom third or so.
Schoen's Batwing Egg
The Schoen's Batwing Egg is tricky in that it has some rather large horizontal surfaces. The model shown was printed with an extensive amount of tree support. While the overall structure held up, the undersides of the horizontal surface required a lot of cleanup.
Fischer-Koch S Egg
The Fischer-Koch S Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schwarz’ CLP Egg
This relatively simple egg requires a small amount of tree support to the bottom bulge. This is a good one to start with.
Schoen’s I-WP Egg
Schoen’s I-WP Egg requires tree supports for the bottom third or so.
Schoen’s F-RD Egg
Schoen’s F-RD Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schoen’s F-RD(r) Egg
Schoen’s F-RD(r) Egg requires tree supports for the bottom third or so.
Fischer-Koch C(Y) Egg
Fischer-Koch C(Y) Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.


Tiny Bunny

Cinderwing3D_MMU_TinyBunny.3mf

Eden the Garden Lindwyrm

LFC Eden the Garden Lindwyrm PAINTED.3mf

Tulip Vase

Tulip vase.stl

Spring MakerChip Base

Demo.3mf

Plain sign for XL and Not So XL easter bunny Male. inc blank

Plain not so xl easter bunny sign(1).stl

Chick Dragon

Chick dragon wingless.stl

Bunny Chick Clicker

BunnyChickClicker_3MF.3mf

Clicky Chick

clicky chick top.stl

Crumpled (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile, they're also shown in the pictures

Shelf Chick

shelf chick main.stl

Gnome Accessory pack

Not so xl welcome sign.stl

Swirly Shamrock Earrings

swirlyshamrockearrings_v2.stl

Easter Egg Flexi

Easter egg flexi.stl

Honeycomb bee fountain

Honeycomb body.STL

Flexible Door Stop

KDD-DoorStop.stl

(Italian) Apulian Pumo (2)

Sharing something about my homeland ☺️

The **pumo** is a** traditional decorative element** from my region, Apulia, which symbolizes **spring** 🌼

Its shape resembles that of a **bud**, ready to **bloom**, with the auspicious meaning of **fertility, wealth and good omen** for future events.

To bring luck, wealth and prosperity, however, the pumo must be given as a gift. In fact, it's often chosen as party favors on several occasions.

In this case, I hope you like and would accept them as my gift for you!

Hope you'll enjoy printing these models and add them to your decorations and also, why not, gift them to your friends, relatives and everyone else you would like to ☺️

**Get the other exclusive models of Pumo available only on my** [Patreon Page](https://www.patreon.com/RandomizY) !
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

🔸 3D Printers: Anycubic Mega SE
🔸 Nozzle: 0.4 mm
🔸 Slicer: Ultimaker Cura 4.13.1
🔸 Layer height: 0.2 mm (0.4 mm wall thickness; 5 top / 2 bottom layers)
🔸 Infill : 0%
🔸 Supports are not strictly mandatory, but you can use them if you prefer (to be sure to better print bottom part of the leaves)
🔸 Printing Temperature: 205°C / Build Plate Temperature: 60°C
🔸 Print speed: 50 mm/sec | Outer Wall Speed: 25 mm/sec
🔸 Filaments: Silk Copper PLA by SUNLU
🔸 Size: 9,8 x 9 x 12 cm (X,Y,Z)
⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)
⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻
**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻
𝗣𝗔𝗧𝗥𝗘𝗢𝗡 : https://www.patreon.com/RandomizY

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

SPRING

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

R7 Gyro Flower Fidget | Spring Gyro Fidget Toy | R7Makers

Schoens Batwing Egg

Tiny Bunny

Eden the Garden Lindwyrm

Tulip Vase

Spring MakerChip Base

Plain sign for XL and Not So XL easter bunny Male. inc blank

Chick Dragon

Bunny Chick Clicker

Clicky Chick

Crumpled (Easter) Egg

Shelf Chick

Gnome Accessory pack

Swirly Shamrock Earrings

Easter Egg Flexi

Honeycomb bee fountain

Flexible Door Stop

(Italian) Apulian Pumo (2)

Springy Cat

Mechanical Dice Gun Spinner