A regular-sized hanger for your Thangs3D t-shirt. It will probably work with other shirts, but this has not been tested.

Hanger is in three parts to allow printing on most build plates.

See here for video: https://youtu.be/q3Oe_8NILzs

See here for standard hanger: https://social.thangs.com/m/98063


Hang That Thang

Hang That Thang Display Only.stl

A regular-sized hanger in three parts to allow printing on most build plates.

See here for video: https://youtu.be/q3Oe_8NILzs

See here for "Hang That Thang" hanger: https://social.thangs.com/m/98064


Standard Hanger

Standard Hanger Display Only.stl

It's the _COOLEST_ coat hanger you've ever seen! The EZPZ Hanger features a quick locking system that allows you to fold the arms down to hang up clothes in a more gentle manner.

The simple gravity-powered lock automatically keeps the arms in place when opened up, and can be easily released by lifting the lock. The modular multi-part design lets you customize each hanger to your needs and aesthetic.

**_"Happy clothes, happy life!"_**

---

**_Printing Guidelines_**

All parts are quite simple and will generally work with your default print settings. You may want to increase wall/shell count to 3 or 4 for the arms and hook if you plan on hanging heavy garments, but I've found just 2 shells and 15% infill works well for general use. I did use 3 shells for the pins, and since they're so small you may even want to print them solid for longevity.

Print the 'Arm' part twice. Both arms are identical, just rotated (do not mirror). You can use the _'Arm_wHook'_ variation for the ability to hang clothes from straps. 

Print one set of _'Pin_A'_ and _'Pin_B'_ for the basic hanger, and four more sets if you want to attach the optional Shoulder attachments. 

The various Shoulder parts soften the ends of the hanger, which may be more gentle on delicate sweaters and heavy coats. I like _'Shoulder_Light'_ for sweaters, and _'Shoulder_Wide'_ for heavy or extra delicate garments. I've also included _'Shoulder_WideOld'_ which has the most broad radius, though clothing can sometimes get caught on the ends while releasing, hence the updated Wide version. Print two A and B parts per hanger

To assemble, first slip the Lock onto the Hanger, then connect the arms using a Pin. Optionally add the shoulder parts afterwards.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA and PETG filaments](https://www.awin1.com/cread.php?awinmid=46345&awinaffid=2034925&ued=https%3A%2F%2Fus.store.bambulab.com%2Fcollections%2Fbambu-lab-3d-printer-filament).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

---

***24-14-06 UPDATE:** Added _Hanger_Larger.stl_ to accomodate more dowels

EZPZ Hanger // Folding Clothes Hanger

Arm_Straight.stl

Arm_Straight_fewerHoles.stl

Arm_Straight_noHoles.stl

Arm_wHook_fewerHoles.stl

Arm_wHook_noHoles.stl

Hanger_Larger.stl

**A print-in-place foldable clothes hanger.** It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds into a small square – perfect for travel.
It comes with a tie bar that also serves at reinforcement. Two indentations allow for the hanging of spaghetti tops. Pants can be placed on the lower bar. It can fit and support a full suit.

**Versions included**
- Clothes_hanger: the default version
- Clothes_hanger_more_clearance: a version with double the clearance at the big hinge. 0.4 mm on both sides and 0.8 mm on top

Disclaimer: Be aware that the strength of the holder will depend greatly on your material choice, print settings and print quality. I printed it in the default bambulap p1p profile. It holds a full suit well. This is a advanced project. If you are new to 3d printing, please know that this design incorporates multiple details that require a well set up machine.

Size assembled: 400 x 180 x 7 mm
Size folded: 162 x 215 x 7 mm

**Print settings**
Required build volume: 220 x 220 x 10 mm
Material usage per complete clothes hanger: 50g

Material: PLA
Print direction: stl is rotated correctly, check images

Make sure that your bridging relevant settings are calibrated well for this design. Those include fan speed, print speed, and print temperature among others. There are many guides for good bridging on Youtube. My personal experience is that the best result is achieved with a quite unspent nozzle.

Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15% minimum
Build plate adhesion type: none

SHIRT

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hang That Thang

EZPZ Hanger // Folding Clothes Hanger