Embark on a morphinominal journey with my 3D printed Mighty Morphin Power Rangers Power Bow! This life-sized 1:1 scale replica pays tribute to the iconic weapon wielded by Kimberly, the Pink Ranger.

Build Video:
https://www.youtube.com/watch?v=JSQLWwm2xGI

There are 2 models for the bow  ends  one witha hole to add a bow string and one without 

3D PRINTING SETTINGS
Layer height: 0.16 - 0.2mm
Walls: 2
Supports: Yes
Infill: 10% - 15%

Follow me on social media:
https://www.instagram.com/mrcampbellprints
https://www.tiktok.com/@mrcampbellprints
https://youtube.com/@MrCampbellPrints

Scale: 1:1 (Life-sized replica)
Bow Lenght:98cm
Bow Height:4.5cm
Bow Width:20cm

Arrow Lenght:76cm
Arrow Width Fin to Fin:10cm
Arrow Width Shaft:1.7cm

This Power Bow replica is perfect for Power Rangers enthusiasts, cosplayers, or collectors looking to own a piece of the legendary series. The bow is carefully designed capture every detail of the original weapon, from the graceful curves to the powerful design.

Pink Ranger Power Bow with Arrow- Mighty Morphin Power Rangers

All Parts.stl

Power Rangers inspire my replica Black Space Ranger Lunar Lance. Just like in the show, the Lunar Lance can connect to the Astro Blaster https://than.gs/m/1366274 to form the combined Lunar Lance Booster Mode.

Build Video:https://youtu.be/hRlrdkSXk6U

Height: 4cm (handle/staff)
Length: 80cm (Non-Extended)
Length 120cm (Extended)
Width: 4cm (handle/staff)
Width: 23cm (Lunar Blade)

Whether you're printing for cosplay, display, or just for fun, each part is crafted for detail and modular connection. When combined, the weapons transform into the iconic versions from the show.

Thanks for supporting Mr Campbell Prints. More awesome builds are coming soon!

Follow me on social media:
https://www.instagram.com/mrcampbellprints
https://www.tiktok.com/@mrcampbellprints
https://youtube.com/@MrCampbellPrints

3D Print Settings:
Layer height: 0.16 - 0.2mm
Walls: 4 (handle/staff) / 2 (everything else)
Supports: Yes
Infill: 10%  -15%  (handle/staff) and 10% (everything else)
Brim: (optional)

If any objects appear too small when sliced, try scaling to 1000%for full-size cosplay builds.

Black Space Ranger Lunar Lance

ALL PARTS  Lunar Lance.stl

This is a digital 3D printable model of Thor's hammer known as Mjolnir.

Contains **three versions of the model**
-  First version which is clear without any cracks
- second that has only structural cracks
- third version, that is meant to be used with inside light source to achieve glowing cracks effect

The third version of the hammer also has removable top lid, that can be attached with two magnets (10mm wide and 5 mm high).

**SIZE**
- Length approx. 383 mm
- Width approx. 217 mm
- Height approx. 135 mm

**3D PRINTING SETTINGS**
- Layer height 0.2 mm
- Infill 15%
- Supports 45 degrees

**THIS IS US!**
Hi! This custom model was created by **3Demon.** We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic.
With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. Explore more of our creations on Thangs, where you can join our **membership!** 
🔥 Membership starts at $9.75 monthly
🔥 Grants exclusive access to our incredible library of models
Follow and tag us on [social media](https://3d-mon.com/links/) to stay in touch! 


 

Mjolnir (Love and Thunder)

mjolnir_whole_clear_OBJ.obj

Joker colt Cosplay Gun Prop
The model cut into parts for easy print, paint and assemble process.
Stand 3d model included.
SIZING: 8,8 inch (220 mm)

Joker colt Cosplay Gun Prop

Jokers gun full .stl

Power Rangers inspire my replica Pink Space Ranger Satellite Stunner. Just like in the show, the Satellite Stunner can connect to the Astro Blaster https://than.gs/m/1366274 to form the combined Satellite Stunner Booster Mode.

Build Video:https://youtu.be/NHmtMue04Hs

Height: 32cm (folded from handle to dish top)

Length 37 cm (when straight)

Width: 6cm (Main body)

Width: 23cm (Satellite Dish)

Whether you're printing for cosplay, display, or just for fun, each part is crafted for detail and modular connection. When combined, the weapons transform into the iconic versions from the show.
Follow me on social media:

https://www.instagram.com/mrcampbellprints

https://www.tiktok.com/@mrcampbellprints

https://youtube.com/@MrCampbellPrints

Pink Space Ranger Satellite Stunner

ALL PARTS Satellite Stunner.stl

_A cryptex is a portable, puzzle-like container, typically cylindrical, that stores a secret message or items behind a combination lock._


---
This cryptex looks like a Mark 2 hand grenade, with four numbered dials that make up the main shell of the grenade. Similar to [my other cryptex on MakerWorld](https://makerworld.com/en/models/1450159-number-cryptex-configurable-puzzle-container#profileId-1510514), it has ratcheting encoding rings that can be used to set any 4-digit passcode you want! And turning the dials is super satisfying thanks to the ratchet!

There are three different versions of the dials you can print:
- Plain — No numbers at all if you want to paint them yourself
- Inset numbers — The numbers are inset holes on the dial
- Embedded numbers — The numbers are embedded and can be painted in the slicer

If you add a small spring to the fuse, you can make the safety lever, "spoon", to pop off when the pin is pulled, just like in a real grenade!

&nbsp;

---
**Printing tips:**
The parts are already oriented optimally. _Inner cylinder_, _Fuse_ and _Safety lever_ need supports. Use tree supports for the _Safety lever_.

If you're using Orca Slicer or Bambu Studio, a handy project file is included that has my print settings and painted parts ready to go!

&nbsp;

---
**Assembly**
You'll need an optional spring, 0.5x5x25mm recommended, for the safety lever action. But the cryptex works just fine without it, it's just a little fun bonus! You can also use a keyring for the safety pin ring, or use a printable ring.

No other hardware required to assemble! If you have printed the *bolt tool* included with [my previous cryptex on MakerWorld](https://makerworld.com/en/models/1450159-number-cryptex-configurable-puzzle-container#profileId-1510514), it will also work for this installation! If not, the tool is included here as well! Or you can use a flat- or hex head screwdriver too.

See the included assembly guide video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Hand Grenade Cryptex — Configurable 4-digit puzzle container

Grenade Cryptex - Bambu Project.3mf

This is a functional Airsoft replica of the beloved BR75 as seen in Halo Infinite.  This chassis takes the internal parts of a Airsoft HPA M4 and turns them into a weapon Masterchief would be proud of.  Video instruction on assembly can be found on the Odd Job Entertainment YouTube channel.

https://www.youtube.com/@OddJobEntertainment

BR75 Airsoft Rifle

BR75main.STL

Explore the realm of fantasy with this stunning 3D model inspired by one of Skyrim's Steel Daggers. Perfect for cosplay enthusiasts and 3D printing hobbyists, this intricate model is designed to be highly sturdy and durable. The 3D printable model comes in three simple PLA plastic pieces, and when assembled, reaches an impressive 22-inch length. Enhanced with a 3/8" dowel feature, it ensures perfect edge alignment during ensures perfect edge alignment during gluing. This design boosts the blade's strength, allowing you to wield and swing it without worry. Dive into the immersive world of Skyrim with this lifelike Steel Dagger 3D model, available exclusively on Thangs.com under the Cosplay Props category. Experience the joy of assembling this magnificent prop, complete with its robust, reliable design and streamlined assembly process. This is more than just a model; it's your ticket to experiencing the thrill of Skyrim in the real world. Dare to venture into the unknown with the Skyrim-inspired Steel Dagger 3D model from Thangs.com.

Skyrim inspired Steel Dagger Replica Cosplay Prop

Handle.stl

This is a Drax inspired blade from the Guardians of the Galaxy movie.

It can be printed in PLA plastic in 3 simple pieces; the fully assembled dagger measures a length of approximately 20 inches. This model is keyed to fit a 3/8 inch wooden dowel down the canter of the assembly to help hold the edges true while gluing, making the blade much more sturdy and it is possible to heft and swing the blade without worrying about it falling apart.

Guardians of the Galaxy Drax the Destroyer Blade for Cosplay

Grip.stl

The Bloody Rose magical anti-vampire weapon - vampire knight anime cosplay prop gun
The model cut into parts for easy print, paint and assemble process.
SIZING: 9 in (23 cm) length

Replica

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pink Ranger Power Bow with Arrow- Mighty Morphin Power Rangers

Black Space Ranger Lunar Lance

Mjolnir (Love and Thunder)

Joker colt Cosplay Gun Prop

Pink Space Ranger Satellite Stunner

Hand Grenade Cryptex — Configurable 4-digit puzzle container

BR75 Airsoft Rifle

Skyrim inspired Steel Dagger Replica Cosplay Prop

The Bloody Rose magical anti-vampire weapon