**Note:** Compatible Stack Mounting for 20mm x 20mm

**This model features the following parts:**
1. Main Frame _(PET-CF or PA-CF Recommended)_
2. Saddle _(PET-CF or PA-CF Recommended)_
3. DJI O4 Pro Camera Mount _(TPU Recommended)_
4. DJI O4 Pro VTX Mount _(TPU Recommended)_
5. Foxeer ELRS LNA RX Mount _(TPU Recommended)
6. Motor Skid _(TPU Recommended)_
7. Motor Skid - Mirrored _(TPU Recommended)_
9. Battery & GPS Mount _(TPU Recommended)_
10. Propellor Skid _(TPU Recommended)_
11. Landing Skid _(TPU Recommended)_

**Other non-3D printed components include:**
- Flight Controller - Mamba 4th Gen MK4 F722 Mini
- Electronic Speed Controller - Diatone Mamba F40 128K BL32 20x20 ESC 40A
- Receiver - Foxeer ELRS 2.4G RX LNA w/ T-Antenna
- Battery - Tattu R-Line 6S - 650 mAh Lipo Battery XT30
- Motor - 4 x ECOII 2004-2000KV Motor
- Propellor - 4 x 4023 - Triblade Gemfan Propellor 
- FPV Camera - Dji O4 air unit pro
- GPS - MATEKSYS SAM-M8Q
- M3 Screws _(see video)_
- M2 Screws & Hex Nut _(see video)_
- M2 Nylon Lock Nut _(see video)_
- Standoff - 25mm M3 Smooth Hex
- Racewire - 4 x RGB RACELITEWIRE

_**Disclaimer:**
This product is designed for hobby and/or commercial use only. Users are responsible for ensuring compliance with all applicable local laws, regulations, and guidelines before using this product. Any misuse, improper handling, or use of this product in violation of local regulations is solely the responsibility of the user. The manufacturer and seller disclaim any liability for damages, injuries, or legal consequences resulting from improper use or non-compliance. By purchasing and using this product, you acknowledge and agree to these terms._

Radio Control & Modelling

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

4-Inch Dead Pushy Cat Drone (Dead Cat Design + Pusher Config)