Pikachu - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Pikachu - Pokemon - Fan Art

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
_**"Storm Bunny"**_
***Sculpt by @ChelsC423***

**_A fun "Springy" sculpt for #MakerMadness_**

***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Storm Trooper Bunny

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
_**"DARTH WHISKERS!**_
***Sculpt by @ChelsC423***

**_A fun "Springy" sculpt for #MakerMadness_**

***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Darth Vader Bunny 

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
**If you enjoy my work, be sure to give it a LIKE!**
_**"DARTH WHISKERS!**_
***Sculpt by @ChelsC423***
**_A fun "Springy" sculpt for #MakerMadness_**

***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
A fun series of balloon animals I've always wanted to make! Hope you enjoy!

***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chaoscoretech

Balloon Bunny

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Who doesn't love a good chocolate bunny?!
PRINTS WITHOUT SUPPORTS!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Chocolate Bunny -(No Supports)

Scorbunny - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Scorbunny - Pokemon - Fan Art

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
**If you enjoy my work, be sure to give it a LIKE!**

***Sculpt by @ChelsC423***
**_A fun "Springy" sculpts for #MakerMadness_**

***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***


Bunny Rubber Ducky

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Some fun "Springy" sculpts for #MakerMadness
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***


RubberDuck_BUNNY.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
More Balloon Buddies, but this guy is festive ;)
***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Balloon Dog -Bunny Ears

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Sized to fit a typical LED tealight candle. But can be printed larger or smaller for just décor!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Egg Tealight Cover -Spring Bunny

Fancy Easter Bunny Threaded Box. Prints in Place. Remix of Easter Bunny Threaded Box by Glytch3d.

Recommend printing with a brim to support the monocle string.

Fancy Easter Bunny Threaded Box - Remix

Easter Bunny Threaded Box Top.stl

I made a keychain with a hidden loop.
With a layer height of 0.2mm you should set up a pause at layer 38 and put the ring in.

I used this Keychain: https://www.aliexpress.com/item/1005003803735916.html

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Flexi Rabbit Keychain

I made a keychain with a hidden loop.
With a layer height of 0.2mm you should set up a pause at layer 38 and put the ring in.

I used this Keychain: https://www.aliexpress.com/item/1005003803735916.html

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by Garrett***
Let us know if you want more Slime Rancher!
***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

Cotton Slime -Slime Rancher 2

I started with just two bunnies and then look what happened! 

The outer ring of bunnies jumps three times while bunnies in the inner ring jump only two times. All the bunnies must dive into the burrow at exactly the right time or they’ll bang their little bunny heads!

See here for a video of the automata in action: https://youtu.be/qjkFrhv4enk

This automata is an advanced print. You’ll need good knowledge of optimal print settings for your machine and the skills and tools to do some post-print processing.

This assembly video (https://youtu.be/wfsd5Y0_sJE) is for a similar cam-based kinetic sculpture: https://youtu.be/wQxTIqx9OIY . The only difference is that this bunny automata has a modular cam assembly.

The attached pictures also show the automata in various stages of assembly.

This automata is an entry into the Spring 2022 Thangs #MakerMadness design competition.

Printing

Print as many of the “Follower (Thin Neck)” and “Bunny” files as you want. The model shown has six in each ring for a total of twelve. 

Print one of each of the remaining files. 
Carefully remove any burrs or imperfections in the print especially on surfaces that move against one another.

The “Spinning Terrain” prints best upside-down with tree supports. When removed, the tree supports leave a nice textured “ground” surface. The hex attachment also prints best when oriented upwards.

The critical bit of cleanup here is that the “followers” slide perfectly through the guides in the “lid.” If there is either too much friction or too much slack the machine will jam.

Lubricate any moving surfaces with Vaseline prior to assembly.

Assembly

1.	Assemble the crank. Place the “grip pin” through the hole in the “crank” and secure it in place with the “grip.” The grip should be able to spin freely on the crank.

2.	Put the cam assembly together. Push the “Outer Bunny Cam” and “Inner Bunny Cam” on to the “Cam Support and Bevel Gear.” In order to achieve proper timing of movement, the cams must be placed on the cam support in the proper orientation. To find the right orientation, align the ridge on the posts of the “Spinning Terrain” and “Cam Support and Bevel Gear” and position the cams such that the lowest point of the cam coincides with the borrow that the bunnies dive under. Place the cam assembly in the “Base.”

3.	Place the “Drive Bevel” inside the base against the hole in the side wall, ensuring that the teeth are properly meshed with the larger bevel gear. Attach the crank assembly from the outside.

4.	The next step is the trickiest. Insert the ball end of one of the “followers” into the cam. You will notice that there are two flat face on the ball. These flat faces permit the ball to be pushed into the cam slot in one direction only, and then to be locked in place with a 90-degree turn. Hold the “Double Track Lid” slightly above the top of the base and push the square end through. Do this with all followers. It’s tricky but doable!

5.	Once all the followers are in place, seat the “Double Track Lid” onto the “Base” and secure in place with the “Lid Screw Top.”

6.	The next step is to secure the “Spinning Terrain” apparatus on to the visible end of the “Cam Support and Bevel Gear”. Notice that there are identical ridges on the ends of both. These ridges need to line up in order for the “Spinning Terrain” apparatus to be timed properly with the cam-driven bunnies. They also allow for the “Compression Collar” to hold them precisely and securely together. Slide the “Compression Collar” over one of the ends. Insert the male hex of the “hoops” into the female hex of the cam and twist the “Compression Collar” in place. The compression collar is not always needed, but it does help to reduce wiggle.

7.	Stick the bunnies on the followers

8.	You may need to do some filing and shaping if there are any misalignments

9.	Turn the crank and hope that the little bunnies don’t hit their little bunny heads!

#makermadness!

“Go, Bunnies, Go!” – A springtime automata

Go Bunnies Go Display Model.stl

Introducing the first member of the springie animals series, bunny springie. 

A fun and cute little bobble head animal model.

Possibility to print using multiple colors.

The used spring is designed by [3D Printy ](https://thangs.com/designer/3DPrinty)([Parametric Bobblehead Springs](https://thangs.com/designer/3DPrinty/3d-model/Parametric%20Bobblehead%20Springs-365301))

Supports needed for head and bottom parts.

#SpringThangs

_ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription._

Bunny Springie

Bunny.3mf

I've made a double sided Easter little Diorama, mixing both 2D and 3D pieces.

You can have fun by printing all the pieces separated and decorate each piece as you prefer before composing your little diorama!

Hope you like it!

**Happy Easter everyone!!** 🐰

(_You get both separated pieces and full version with this file.
You can also find a "special" part which will be used for SUNLU contest [here](https://www.facebook.com/groups/sunlucommunity/posts/2216636418493798/?__cft__[0]=AZUBag8Rol66-JMs1oZky42cRRTIZ8OF8gZMn137QDUTNyhKnn2fuzpGNH_eb_PnsTNOwRSFxUschb2RXcnWp33fHv1FN4Fc0uxOZEQXAZK34DiVyvZE9l75PaINmUO_h7Zn8nFNz-vCcWBPRnnLdrpS&__tn__=%2CO%2CP-R)_)
⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :

- 3D Printers: Anycubic Mega S/SE | Fokoos Odin-5 F3 | Geeetech A10
- Nozzle: 0.4 mm
- Slicer: Ultimaker Cura 4.13.1
- Layer height: 0.3 mm (0.4 mm wall thickness; 3 top / bottom layers)
- Infill : 50% (Lightning)
- No support needed
- Printing Temperature: 205°C / Build Plate Temperature: 60°C
- Print speed: 60 mm/sec | Outer Wall Speed: 30mm/sec
- Filaments: SUNLU
- Size: Full version 8,7 x 8,2 x 12 cm (X, Y, Z)
⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

Easter Little Diorama

Full.stl

Ground_back.stl

I used 6 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 20 and 63.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Flexi Rabbit with hidden magnets

[Pen Pot on TikTok](https://www.tiktok.com/@3domsculpts/video/7272742883394915616?is_from_webapp=1&sender_device=pc&web_id=7253746681388910107)

Super cute Bunny Pen Pot and Planter
Painted files included.
No support required.

This is for personal use only
Please do not share or redistribute the files.

If you would like to sell printed models of my designs commercially, please consider joining my  [Thangs membership](https://than.gs/u/1011506)

Please post your makes here on Thangs, and tag me if you post on social media.

https://www.instagram.com/3domsculpts/
https://twitter.com/3DomSculpts


#backtoschool

Kawaii Bunny Pencil Pot and Planter BackToSchool

Kawaii Bunny Planter.stl

**Where 3D printing meets paper craft** #MakerMadness

This is a 3D model that acts like paper and can be folded into a small treat or gift box.

**Print settings**
1. First layer height: 0.20
2. Other layers height: 0.05
3. Bottom Fill Pattern: Concentric
4. Top Fill Pattern: Monotonic (default)
5. Layer color changes occur at 0.35, 0.65, and 0.95 mm

The color changes are already set for you in the .3mf file.

**Folding Instructions**
1. Turn the model face down.
2. Slightly bend both sides with the sets of ears towards the center and hold the ear pairs together.
3. Slide each slit over both ear pairs.

Bunny Paper Folding Craft

Bunny Paper.3mf

Hey! I fixed this model https://www.thingiverse.com/fred14000 .

Easter rabbit scan fixed & smoothed

rabbit_fix.stl

Description
This is a 3D printable model based on HOLOLIVE talent USADA PEKORA. There are other models available on OPENSEA and PATREON.
You will get a google drive link upon purchasing any selected model on Opensea. It consists of .stl files, .blend file and step by step assembly guide. I only upload the stl files here. If you wish to support my work, please purchase them from OPENSEA or subscribe my PATREON 
Please check out the following site for further information: 
Youtube Intro Video: https://www.youtube.com/watch?v=P2BCtvoKjLU
Opensea: https://opensea.io/FANMADE_NFT
Twitter: https://twitter.com/FANMADE_NFT
Patreon: https://www.patreon.com/FANMADE3DPRINTABLE

DISCLAIMER:
These are purely fan made. Please credit me and HOLOLIVE if you wish to share any of my work here.


Rabbit

Most Popular of All Time

Categories

Popular

Personalize

Trending