3D printed in vase mode, 0.2 layer height, single wall, 2 layers top and bottom.

3D Printed t-28 trojan plane (3D printed with plastic bottles filament)

Nose_cone.stl

Wing_1_L.stl

🛠️ Professional EDF System: High-Thrust Modular Design
First Type EMV EDFs.

Designed by an RC Pilot for true RC enthusiasts. This isn't just a 3D model—it's a flight-tested propulsion system engineered for maximum efficiency, clean aerodynamics, and ease of assembly.

🌟 PROPRIETARY FEATURES:
"Shell-Lock" Stator (Exclusive Design): My innovative split-stator housing snaps perfectly around the motor. No more struggling with tiny screws in tight spaces! It’s a rock-solid, tool-less motor mounting system.

Zero-Drag Cable Management: One of the stator vanes acts as a structural conduit. Your motor wires are "hidden" inside the airfoil, protecting them from the spinning rotor and eliminating aerodynamic turbulence for a cleaner intake.

Precision-Engineered Rotors: Unique blade pitch, curvature, and twist designed for high static thrust and that authentic, high-pitched "jet" sound.

Multi-Shaft Compatibility: Each pack includes specialized hubs for 3.0mm, 3.17mm (1/8"), and 4.0mm shafts (and larger for the 150mm beast) to ensure a perfect, balanced fit without sloppy adapters.

⚠️ WARNING: FOR EXPERT BUILDERS ONLY – READ BEFORE PRINTING
To operate these fans safely at high RPM, two mandatory mechanical procedures are required:

Shaft Modification (Mechanical Lock): You MUST cross-drill the motor shaft (1mm) to install a steel locking pin. This is the only way to safely anchor the rotor against high torque.

Mandatory Dynamic Balancing: 3D-printed rotors are DIY components and MUST be dynamically balanced before use. High-RPM rotation without proper balancing WILL lead to catastrophic structural failure (explosion). Use at your own risk.

Material Recommendation: Rotors should be printed in high-tenacity materials like Carbon Fiber Nylon (PA-CF) for structural integrity.

📦 WHAT’S IN THE BOX:
Main Fan Shroud (Optimized versions for both Inrunner & Outrunner motors).

Complete set of Rotors (5, 7, 9, and 11-blade options).

Specialized hubs for various motor shaft diameters.

RC Plane

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

3D Printed t-28 trojan plane (3D printed with plastic bottles filament)

EDF 64mm EMV - COMPLETE "Shell-Lock" SYSTEM - (5-7-9-11 Blades | Multi-Motor Fit)