HDMI Plug

HDMIplug.stl

MiniMonster BabyDragon Keychain

MiniMonster#1_KeyChain.stl

 Bat & Ball Impossible Pass Through Fidget (2 Sizes)

 Bat and Ball Impossible Pass Through Fidget.3mf

Winter Dragon

Cinderwing3D Winter Tall Antlers Winged.stl

Flexible Rose Dragon

Brave Trug-Gogo.stl

Crystal Dragon

Crystal Dragon V2.3mf

Magnetic Tiles Haunted House (PORCH LIGHT)

Porch Light Base.stl

Creepy Zombie Wall Mount

Zombie_wall Mount.stl

Tippi Tree Stacking Game

Take turns stacking Leaves on top of your **Tippi Tree**, but don't let it topple! The aim of the game is simple, but you'll find that every round can offer new challenges and surprises. This stacking game features a unique S-shaped Leaf piece that connects to other Leaves in over 60 different ways, so every Tippi Tree grows differently. That makes this game fun and challenging for anyone from age 6 to 106. Great for parties, family nights, desk distractions, and a fantastic gift! 

---
 

**Tippi Tree** is an original game designed for 3D printing. Easy to PRINT & PLAY!

---

This download includes all the parts necessary to build your Tippi Trees:

- Tippi Tree

- Branch

- Tall Trunk

- Short Trunk

- Leaf

Plus bonus parts:

- Test piece

- Tiny Tippi Tree

- Alternate Styles (Blocky and Dual)

- Printable Logo!

- **& MANY MORE** (see updates below)

 

You'll also get PDF instructions for printing and playing:

- Game Manual (printable PDF color and B&W) 

- Printing Guide (printable PDF color and B&W)

I hope you find these instructions thorough and enjoyable! 

 
---

**_General Printing Instructions_**

- All parts print at 11% infill, 2-3 shells, 5 top and bottom layers with a standard 0.4mm nozzle. No supports required.

- PLA suggested but not required. Photos show leaves printed with [MatterHackers PRO PLA](https://bit.ly/PRO-PLA)

- For more details + troubleshooting, please refer to the included Printing Guide


---

**_Update History_**

**Dec 14 2020 Update:**

- Added Tiny Leaf V2 that fits way better than the original
- Added Game Manual translations for German, Spanish, and Italian (thanks Marcel F., Valentín G, and Giovanni L. for volunteer translations)

**February 10 2021 Update:**

- Added Tiki Tree Skin (based on winning competition entry by Jen Day and Bill Drastel)
- Added Leaky Hydrant Skin (based on winning competition entry by René von Koolwijk)
- Added Birds & Berries
- Added Experimental Leaves, Trunks, Branches
- Added Split Tippi Tree Base
- Added Tipmas Tree Puzzle
- Added Belt Printer Version for Leaf (no chamfer on leading edge)
- Added Game Manual translations for Swedish and French (thanks to Thomas H, and Jules S for volunteer translations)
- Removed square version of the manual and printing guide to simplify things

**October 26 2021 Update:**

- Improved fit of Tiny Branch models

**November 30 2021 Update:**

- Added 'Split Tree' version of the Tiki Tree [~/02.Printing Files/02.Extras/05.Tree Skins/01.Tiki Tree (Concept by Jen Day and Bill Drastal)/Tiki Tree_Split Tree Version.stl]

**May 07 2022 Update:**

- Added 'Tiny Berry' files [~/02.Printing Files/02. Extras/02.Tiny/Tiny Berry/...]
More birds! Added Baby Bird, Bluebird, Cockatoo, Finch, and Sparrow [~/02.Printing Files/02.Extras/06.Bonus Bits/01.Birds/...]
**July 25 2022 Update:**

- Added split version of Tiny Tree [~/02.Printing Files/02.Extras/02.Tiny/Tiny_Tree_Split_A.stl + _B.stl]

Tippi Tree // Original Tabletop Stacking Game

arttheshelfelfv2.stl

Here is my rendition of the classic Elf on a Shelf.  I wanted to make an articulated design that prints in place with no supports.  Rather than "recreate" the Elf on a Shelf, I wanted to give it a more robotic look and feel.

Art has 11 points of articulation, and the head rotates a full 360 degrees to display one of two faces (Happy and Sad).  

**3D printing settings**

Size: 75 x 118 x 147
No Supports, Print in Place.  After printing, just twist the head to break away the internal supports!

Here are the settings I printed him with:
Nozzle: 0.4
Layer Height: 0.2
Infill: 15%



Articulated Dragon 022 Keychain - Print in place - No supports - STL

ARTICULATED DRAGON 022 KEYCHAIN.stl

Cacti bowl, snack bowl with container.

Plant 1.stl

SPIRALIS Pot 001

SPIRALIS_001.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Print in Place

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

HDMI Plug

MiniMonster BabyDragon Keychain

Bat & Ball Impossible Pass Through Fidget (2 Sizes)

Winter Dragon

Flexible Rose Dragon

Crystal Dragon

Magnetic Tiles Haunted House (PORCH LIGHT)

Creepy Zombie Wall Mount

Tippi Tree Stacking Game

arttheshelfelfv2.stl

Articulated Dragon 022 Keychain - Print in place - No supports - STL

Cacti bowl, snack bowl with container.

SPIRALIS Pot 001

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

Pixel Pumpkin Fidget (2 sizes)

M3D - Flexi Baby Chameleon

Baby Love Raptor - Articulated Dragon Fidget Toy for Valentine's Day

Stretchy, Slinky Pumpkin

Egg Jail: Festive Easter egg lock box with a Maze Challenge

Articulated Dragon Keychan 009 - Print in place - No supports - 3MF - STL